P1000 Will They Fit?

[branr1]

So I'm thinking of holding onto my 2016 for another year and I've wanted to do a shock upgrade. I've basically decided on which shocks I'd like. I plan to purchase a new Pioneer next year. From what I've seen it looks to me like any aftermarket shocks I purchase for my stock 2016 should fit a new stock 2022 and more than likely a 2023. Am I missing anything?

 

[Admin]

 

[Rayger143]

I just looked up on Ron Ayers a 2021 and 2022 and the Fox front were the same part#. I will attach the link so you can check yourself.

ronayers.com: Online Shopping Motorsports Parts

Honda Suzuki Kawasaki Yamaha OEM motorcycle atv and side by side parts with a full line of aftermarket accessories.

www.ronayers.com

 

[bumperm]

Is the plan to put new shocks on your '16 now, ride it another year, then yank the shocks before you sell it? That seems to me (I'm slow sometimes) that it would only make sense if you were gonna buy a low end 22 or 23 that has cheaper OEM shocks. If you were getting a Forrest or Trail, those would come stock with better shocks, of course.

 

[branr1]

Is the plan to put new shocks on your '16 now, ride it another year, then yank the shocks before you sell it? That seems to me (I'm slow sometimes) that it would only make sense if you were gonna buy a low end 22 or 23 that has cheaper OEM shocks. If you were getting a Forrest or Trail, those would come stock with better shocks, of course.

Yes that’s my thought, I wanna get the Deluxe or below because I wanna avoid the I-4wd. I’ve had good luck with the old system in my 2016 and I’ve read some reviews and seen a few videos of the I-4WD not being as good as a true locking differential. I’ll just swap the stock shocks back on when I sell. I just ordered the shocks.

 

[WagginTail]

Yes that’s my thought, I wanna get the Deluxe or below because I wanna avoid the I-4wd. I’ve had good luck with the old system in my 2016 and I’ve read some reviews and seen a few videos of the I-4WD not being as good as a true locking differential. I’ll just swap the stock shocks back on when I sell. I just ordered the shocks.

What kind you getting?

 

[branr1]

What kind you getting?

Well I was set on stage 1 Elka’s but after Rayger143 replied above I went to the 2022 oem parts microfiche and ordered the 1000-5 Trail model front and rear Fox shocks. I ordered the 1000-5 shocks assuming the spring rates would be higher, we always run fairly loaded and with at least two sometimes three people.
Part#s
Front 51400-HL4-AG1ZA
Right Rear 52400-HL4-AG1ZA
Left Rear 52500-HL4-AG1ZA

Now after doing a little more digging here I’m worried I’ll end up in the back order blackhole. My order showed an expected delivery of 6/3/22-6/8/22.

 

[WagginTail]

Well I was set on stage 1 Elka’s but after Rayger143 replied above I went to the 2022 oem parts microfiche and ordered the 1000-5 Trail model front and rear Fox shocks. I ordered the 1000-5 shocks assuming the spring rates would be higher, we always run fairly loaded and with at least two sometimes three people.
Part#s
Front 51400-HL4-AG1ZA
Right Rear 52400-HL4-AG1ZA
Left Rear 52500-HL4-AG1ZA

Yea the spring rate should be higher on the front. Not sure about the back. Hopefully they are in stock and not on backorder. Last I was told from Ron Ayers is that all the oem fox shocks were on backorder

 

[branr1]

Yea the spring rate should be higher on the front. Not sure about the back. Hopefully they are in stock and not on backorder. Last I was told from Ron Ayers is that all the oem fox shocks were on backorder

I’m hoping somethings changed and they can ship them. I don’t mind waiting a little but I’m not into waiting months on end.

I’m hoping because I ordered the OEM shocks for the 2022 they come with Silver springs. Spring color isn’t a deal breaker but it’ll match my Highlighter motif better.

 

[Scoop]

I’m hoping somethings changed and they can ship them. I don’t mind waiting a little but I’m not into waiting months on end.

Nothing has changed. Fox keeps pushing the ESD (estimated ship date) to Honda every month. Every month the date comes, they push it out another. Been doing that for quite some time on QS3's front and rear. They just pushed it yet again to late June. I was waiting since the beginning of NOV. I finally told Ayers forget it and issue me a refund (they did). If I keep this thing (currently for sale), I'll put something other than Fox's on there.

 

[branr1]

Nothing has changed. Fox keeps pushing the ESD (estimated ship date) to Honda every month. Every month the date comes, they push it out another. Been doing that for quite some time on QS3's front and rear. They just pushed it yet again to late June. I was waiting since the beginning of NOV. I finally told Ayers forget it and issue me a refund (they did). If I keep this thing (currently for sale), I'll put something other than Fox's on there.

I’m fully expecting an email telling me they are on back order. Of course nothing in regards to being delayed is mentioned while ordering, and the order confirmation email has an expected delivery in early June. At this point they must know they are back ordered so why not be upfront.

 

[Scoop]

I’m fully expecting an email telling me they are on back order. Of course nothing in regards to being delayed is mentioned while ordering, and the order confirmation email has an expected delivery in early June. At this point they must know they are back ordered so why not be upfront.

My "We're sorry for the inconvenience, but an item on your order ###### has been placed on back order with the manufacturer" e-mail from Ron Ayers arrived 9 days after I placed the order. It will come from Allen Gates. You'll get to know him well, depending upon how long you are willing to wait. He's really good friends with @WagginTail, too 🤣

 

[branr1]

My "We're sorry for the inconvenience, but an item on your order ###### has been placed on back order with the manufacturer" e-mail from Ron Ayers arrived 9 days after I placed the order. It will come from Allen Gates. You'll get to know him well, depending upon how long you are willing to wait. He's really good friends with @WagginTail, too 🤣

I’m not looking forward to it. Now I’m wondering if I should cancel and order the Elka’s or 814 shocks.

 

[P1K5Dave]

I'd skip the 814s

 

[WagginTail]

Just order fox for a 1000-3. Call and talk to Allen Gates. He will tell you if the Honda warehouse is showing in stock or not. That's what I ended up doing. Seems like he should do that with the initial email though
And you'll end up wanting to put single rate springs on anyways

 

[branr1]

I sent an email to Ron Ayers and Allen replied quickly. One of the rear shocks is in stock and the other three shocks are on backorder with no ESD. I requested my order be canceled and my card refunded. I’m bummed but I appreciate you guys sharing the info. Any suggestions on shocks? Or am I out of luck in the current world situation.

 

[WagginTail]

I sent an email to Ron Ayers and Allen replied quickly. One of the rear shocks is in stock and the other three shocks are on backorder with no ESD. I requested my order be canceled and my card refunded. I’m bummed but I appreciate you guys sharing the info. Any suggestions on shocks? Or am I out of luck in the current world situation.

Dern. Last week he told me there were 10+ sets of front shocks for the 1000-3. I ordered some Wednesday or Thursday and they was at my house yesterday. These are the aftermarket qs3 with red springs

 

[john790]

I dont understand are they fox shocks or not.