U joints

[Razorback]

About to change front u joints and front wheel bearings. Anyone have a recommendation on where to order parts from?

 

[Admin]

 

[TripleB]

About to change front u joints and front wheel bearings. Anyone have a recommendation on where to order parts from?

Ronayers.com. look under OEM parts 20-25% off most parts. Free shipping over $129 and no taxes unless you live in North Carolina.

 

[Hello_Darkness]

About to change front u joints and front wheel bearings. Anyone have a recommendation on where to order parts from?

Which front u-joints?
The driveshaft isn't really serviceable.

 

[SLOWPOKE693]

The driveshaft isn't really serviceable.

Maybe not from Honda, but many of us have swapped out the U joints in the stock driveshaft with aftermarket joints from NAPA.

 

[ODAMO]

@Razorback did you mean the u joints on the front axles? If so the are referred to as cv joints. There are actual U joints on the front driveshaft though.

 

[Razorback]

@Razorback did you mean the u joints on the front axles? If so the are referred to as cv joints. There are actual U joints on the front driveshaft though.

On the driveshaft

 

[CID]

On the driveshaft

I believe there's a Moog part number for that u-joint but I'm not home, so I can't check it for you.

 

[906UP]

I believe there's a Moog part number for that u-joint but I'm not home, so I can't check it for you.

There is a U-joint, I have one at home on the shelf but save yourself the trouble and get the @SuperATV drive shaft w CV joints, the OEM one sucks ballz

 

[CID]

There is a U-joint, I have one at home on the shelf but save yourself the trouble and get the @SuperATV drive shaft w CV joints, the OEM one sucks ballz

That will be my choice if it becomes necessary.

 

[ODAMO]

There is a U-joint, I have one at home on the shelf but save yourself the trouble and get the @SuperATV drive shaft w CV joints, the OEM one sucks ballz

So the SuperATV one has balls but doesn’t suck And the OEM one has no balls but sucks them. Got it.

 

[Razorback]

I believe there's a Moog part number for that u-joint but I'm not home, so I can't check it for you.

838

 

[Vikes79]

@SuperATV what’s the holdup on the 1000-4 replacement drive shaft?

 

[SuperATV]

So the SuperATV one has balls but doesn’t suck And the OEM one has no balls but sucks them. Got it.

Has balls!! Doesn't suck!!!

 

[SuperATV]

@SuperATV what’s the holdup on the 1000-4 replacement drive shaft?

I KNOW its on the list. I'll find out tomorrow when everybody gets back in.

 

[Vikes79]

I KNOW its on the list. I'll find out tomorrow when everybody gets back in.

Don’t leave us X-4 and R-4 guys hanging!

 

[Hometeam]

Don’t leave us X-4 and R-4 guys hanging!

You 4 seater cheater club. You guys are like the grown up bullies of the playground!!

 

[SLOWPOKE693]

You 4 seater cheater club. You guys are like the grown up bullies of the playground!!

Right up until it's time to make a tight turn...

 

[Vikes79]

Right up until it's time to make a tight turn...

Absolutely the truth. my x4 takes the south 40 to turn vs my P1k5. Fortunately the rears are locked and it has a go pedal lol

 

[Vikes79]

I KNOW it’s on the list. I'll find out tomorrow when everybody gets back in.

It was on the list a year ago …lol

Post in thread 'Vikes79 longship rebuild thread'
Vikes79 longship rebuild thread

 

[SuperATV]

It was on the list a year ago …lol

Post in thread 'Vikes79 longship rebuild thread'
Vikes79 longship rebuild thread

Well......somebody forgot it.

I just checked on it and got it bumped up the list. The numbers guys just don't get it sometimes.

HOPEFULLY (fingers crossed) I can get them into production and have them ready by September. That's would probably be the earliest I can have them ready. My guy over the props says he's going to try to bump them up the ladder more, but that's probably best case scenario right now.