P1000 19 p1K-5 LE build!!

[Longrod88302]

Meat!

We ride a couple miles of pavement to get to our trails. I wonder how much I'd have to crank up the stereo with those vs. my Maxxis Liberty's (basically an all-terrain truck tire style.)

Honestly I’ve been driving it to work (about half mile) since yesterday and the factory bighorn 2.0s made more road noise than these do! But these are definitely a bit tougher haha just gotta break em in!

 

[Raynman]

Nice build, look sweet!

 

[Longrod88302]

Nice build, look sweet!

Thank you!!

 

[Longrod88302]

***update*** just started the floor mod install! Much easier than I anticipated and it’s looking and functioning perfectly! Full lock and full compression and zero rub! Also went ahead and raised the coilovers all the way around being I found the drivers side was about an eighth shorter on the adjustment from the factory so I cranked them all up evenly about 3/4 of an inch. Which through the control arm geometry would be roughly 1-1.5” and it’s perfect! Checked full lock axle binding and everything is free and clear. Big shoutout to trading house outdoors on the floor kit it’s a spotless clean well made kit🤟🏻Still waiting on the exhaust part to come in but I did just get my vent line extension kit and I ordered the big gun efi tuner to correct the AFRs so I’ll update again soon!!!

 

[JenElio]

***update*** just started the floor mod install! Much easier than I anticipated and it’s looking and functioning perfectly! Full lock and full compression and zero rub! Also went ahead and raised the coilovers all the way around being I found the drivers side was about an eighth shorter on the adjustment from the factory so I cranked them all up evenly about 3/4 of an inch. Which through the control arm geometry would be roughly 1-1.5” and it’s perfect! Checked full lock axle binding and everything is free and clear. Big shoutout to trading house outdoors on the floor kit it’s a spotless clean well made kit🤟🏻Still waiting on the exhaust part to come in but I did just get my vent line extension kit and I ordered the big gun efi tuner to correct the AFRs so I’ll update again soon!!!
View attachment 250238View attachment 250239View attachment 250240View attachment 250241View attachment 250242View attachment 250243View attachment 250244View attachment 250246View attachment 250247

Looks good, is that mod pc plastic? Or metal/aluminum?

 

[Longrod88302]

Looks good, is that mod pc plastic? Or metal/aluminum?

Thank you! It’s a metal piece👍🏻

 

[sek-hunter]

Did you figure the wheel out? I had those same wheels on my 700 and always had a shake at certain speeds.


Sent from my iPhone using Tapatalk

 

[Longrod88302]

Did you figure the wheel out? I had those same wheels on my 700 and always had a shake at certain speeds.


Sent from my iPhone using Tapatalk

The wheels are great!! I haven’t noticed anything other than a little cold bogger wobble that’s it!

 

[Longrod88302]

***update*** Finally got the new end cap for the big gun exhaust! Took almost 3 weeks but they had to build it and ship it. So anybody that has a 1000-5 big gun exo call them and they custom make the end caps that turn out away from the cage and it sounds just as a amazing🤟🏻Also!! I pulled the trigger on the piggy back big gun fuel tuner. And it definitely help especially with starting and on top end. I’ve left it on stock setting because I’m in Florida and the said they tune at sea level. All around big gun is an awesome company with good people. Customer service is top notch!!