P1000 30” tires+SATV arms+spacer?

[tdhanses]

Will I need a spacer for the front? Wheels on order are the standard 5+2 most are using. I have a 1” and 1.5” spacer on order but would prefer to only use a spacer in the rear. i Know the SATV a-arms move the wheel 1.5’ forward but I assume they are still stock width.

Tires are 30x10x14 Maxxis Rampage, no clue if they are a true 30” or more of a 29.5”, going on 14x7 wheels.

 

[Admin]

 

[JoeyL]

I have the SATV arms w 5+2 wheels and 30" x 10" tires (30.25 actual) and no spacers.
all good so far - no issues

 

[JoeyL]

FYI i also installed the rear A arms. not sure if you need them or not.
my only complaint so far is with the reduced turning radius.

 

[tdhanses]

I have both so will be also installing the rear, wasn’t as worried about the rear as the front for rubbing, did you do 1” spacers in the rear or non there as well?

 

[ToddACimer]

I just installed 30" EFX motovators on 14x7 5+2 wheels. I have SuperATV arms front and rear with 1" rear spacers. I was able to articulate it and found I have quite a bit of tire clearance in a static articulation

 

[JoeyL]

What do you think about my plan to run the track horizontally across the width of the floor?

i went with the 1" spacers in the rear.

i would definitely recommend some kind of mud guard/fender flares with the wider track.
i went with the honda ones in front and made my own for the back from bailer belt (tractor supply).

 

[JoeyL]

i went with the 1" spacers in the rear.

i would definitely recommend some kind of mud guard/fender flares with the wider track.
i went with the honda ones in front and made my own for the back from bailer belt (tractor supply).
View attachment 239930View attachment 239931View attachment 239932

not sure how that quote got in there. should have quoted this post

I have both so will be also installing the rear, wasn’t as worried about the rear as the front for rubbing, did you do 1” spacers in the rear or non there as well?

 

[tdhanses]

Thanks guys! This helps a ton.