trigger
Old Ironsides
Vendor
Lifetime Member
Supporting Member
That's a good setup. Why you want to go so wide though as opposed to 5+2's? If my math is right that's going to put you around 56"/57" at the front end.
Just pulled the trigger on 4 Bear Claw HTR’s 27x9x12 with a pair of ITP Deltas 4+3 for rear and a pair 5+2 for front…should be square if not a hair wider in back…I’ll post up pics after I receive them and get em mounted up
Found my post from when I installed.
53.5, square stance with 9s front, 12s rear.
There's some poke there though. Will throw some mud.
I added Mudbusters, which put my plastics at 56".
Made the rear look odd, so I added 1" spacers to the rear.
She ain't 50" no more, but she's a goat!
53.5, square stance with 9s front, 12s rear.
There's some poke there though. Will throw some mud.
I added Mudbusters, which put my plastics at 56".
Made the rear look odd, so I added 1" spacers to the rear.
She ain't 50" no more, but she's a goat!
P500 - Upward and Outward (27s on 12" 4+3)
Pretty much decided to give the little P5 some better height; and since my head-bangin' days are mostly over: some width. Under consideration: Kenda Bear Claw HTR, undecided on wheels 27x9x12 for front 27x11x12 for rear 4+3 rims front and rear, no spacers Can anyone guesstify what my width...
hondasxs.com
trigger
Old Ironsides
Vendor
Lifetime Member
Supporting Member
Curious as to how you're measuring your stance? With 5+2's and 10" wide tires, I'm at roughly 55" depending on the day. I'm measuring mine in the garage with a level at the very bottom of the bulge. Then rolling it back and taking my measurement. Had 1" spacers on the front and I was at 57", too wide for me.
That would be too wide for me as well; almost may as well buy a 60" machine at that point.
Measured from sidewall to sidewall, as I recall. My rear plastics are now at 56" with the Mudbusters, and even with 11s and 1" spacers on the back I'm still inside the plastics.
Once I get them and get them mounted up I’ll measure the same way
trigger
Old Ironsides
Vendor
Lifetime Member
Supporting Member
I'd have to go back and look at old posts to see where I was with the different setups. I want to say with 5+2's and 26x9 I was at 54" in the front. The rear was close enough to even running 11's. With same size on all four I had to put 1" spacers on the rear to even the track width.
Similar threads
- Dwrettig
- Pioneer 500/520 Wheels and Tires
