P700 Anybody installed the EZ steer power steering kit

[Plumber32]

All done and tested. Absolutely awsome. Took me 3hr. Oscillating tool is way to go for cutting plastic. I took my time and studied the instructions every step of the way. What I really noticed was there's no delay in the steering on my canam atv there was a delay once in awhile. Not so with this, at least in the little I tested it.

 

[Admin]

 

[spifyd]

nice jobs guys. very clean installs

 

[4drakes]

One of the best investments I have added to my pioneer 700. I love my fox shocks too but the power steering is a must no bump steer anymore. Went to the Upper Peninsula in Michigan rode 800 miles in a week no fatigue very comfortable awesome. It took me about 3 hours but I am very particular and want it to look like it was done at the factory. I installed it last June no problems what so ever.

 

[Tflynn]

Superatv had a sale on EZ steer soooo..... I would have been a fool not to get it, right? It's in the mail! Reading through here sounds like the install isn't too bad. Any tips or advice on installation?

 

[joeymt33]

You're going to love it!!

It's not too hard. Plan for several hours and have some patience.

 

[dRichard]

Superatv had a sale on EZ steer soooo..... I would have been a fool not to get it, right? It's in the mail! Reading through here sounds like the install isn't too bad. Any tips or advice on installation?

What was the price? I see it for $600

 

[allgm1]

What was the price? I see it for $600

thats about the price, I would call them directly and ask them if they can "do" anything.
and WELL worth every penny of it. I used to chuckle reading posts about power steering, thinking, huh I don't need power steering. Well I was right, I don't NEED it but having it makes the ride so much better.

 

[Tflynn]

What was the price? I see it for $600

It was on sale for $530 for 3 days only, ending the 20th. Like @allgm1 said, maybe if you email them, say you just barely missed the sale and can they help you out? It might work... They email me when they have sales, that's the only reason I knew about this one. I'll try to be better about alerting everybody

 

[Plumber32]

Superatv had a sale on EZ steer soooo..... I would have been a fool not to get it, right? It's in the mail! Reading through here sounds like the install isn't too bad. Any tips or advice on installation?

It's pretty straight forward take your time and have a 2nd set of hands, I tied my Power into the winch solenoid, worked fine. I have so many wires coming out of my battery already. First time you flip on the key and move the wheel, you'll be so proud. At least I was!

 

[Tflynn]

Looking through the instructions...did you all find that removing the entire dash was really necessary?

 

[Plumber32]

Looking through the instructions...did you all find that removing the entire dash was really necessary?

I didn't remove it. Just the driver side fender.

 

[CumminsPusher]

529 free Shipping always check there.

 

[Tflynn]

I didn't remove it. Just the driver side fender.

Ok good that should make life a little easier. Thanks!

 

[allgm1]

I didn't remove the c clip on the steering colum either., theres enough room to install the steering shafts before you tighten everything down.

 

[hydrantman]

I also did not remove the dash I'll post some pictures today of my install.

 

[joeymt33]

Same here @Tflynn. I didn't remove the C-clip or dash. I just removed the driver side fender.

 

[randi 58]

Thank you guys I'm going to put one on tomorrow

 

[Tflynn]

Thanks everybody for the replies. I'm getting ready to tackle it today!

 

[joeymt33]

Don't expect to be done in an hour or two. Or, if you can do it quickly, don't tell me about it and make me feel insignificant.

 

[allgm1]

Took me around 4 hrs I think, Im older, half blind, and had to work around the pre installed heater. I was loving it yesterday while trying out the plow for the first time.