Attended TO 2024 and now I “need” ….

[Fatsquatch]

I talked to a guy who has a diesel heater in his. Has exhaust piped outside. He's a heating and cooling guy by trade. Cheap and supposedly safe .

View attachment 431471

Trailer is vented and I would put a carbon monoxide/smoke detector in it so I was thinking a wall mount propane panel heater. We will see. A/C will come first. lol I can double layer sleeping bags and blankets to help with colder nights when needed for now.

 

[Admin]

 

[Bcavin351]

A new liver

 

[Russ989]

I didn’t attend and still have a list of needs.

 

[Coeus]

I didn’t attend and still have a list of needs.

Fomo on that list?

 

[Russ989]

Fomo on that list?

Not really, I have enough things with work to occupy most of my time.

 

[Jason W]

I did ok I think for my first ever trail ride. I need to remove my rear stabilizer and install a front differential locker.

And maybe wheel spacers for more stability

 

[Neohio]

I have ya covered buddy!

Yeah, I know you do! I guess it is a benefit being your mechanic, I need to test drive after repair to verify it is correct.

 

[futzin]

And maybe wheel spacers for more stability

Spacers are good for a P5 trail machine. RB3, of course!

 

[GovtMule]

A new liver

I thought those sodas were for @Adam490 ?

 

[-Bear-]

I didn’t attend and still have a list of needs.

X2!

#Nomo

 

[-Bear-]

Please reach out, we will be more than happy to get ya set up.

I will most definitely get in touch and not in a Jadie way, thank you!

#Nomo

 

[Red500]

I do not know what is involved in removing rear sway bar. You could remove links and zip ties out of the way, or try and remove completely

That's what I did on mine, It is disconnected but it's still on the buggy.

 

[futzin]

Mine's in my basement along with stock 'skid plates', stock 'shocks', stock 'tires', etc . . .

It is kind of a trick to twistify that thing out of there.

 

[Hoosier1960]

And maybe wheel spacers for more stability

I actually have a pair of 1” spacers. I need to do some measuring on the width.

 

[Haldog77]

A 2nd spare tire for the trailer...

Buy once, cry once. Put some good quality heavy duty trailer tires on the rig. Make sure they are balance and the bearings are in good shape.

 

[The Green Goat]

I actually have a pair of 1” spacers. I need to do some measuring on the width.

It'll be whatever stock is, plus 2 inches.



I'm here for you.

 

[Vondy]

"Need" to schedule next ride!

 

[Vondy]

"Need" to schedule next ride!

Is Mom Ride Sept 27-28? @Backwoods

 

[KyGal83]

I actually have a pair of 1” spacers. I need to do some measuring on the width.

Like you I run a 5+2 offset as well, you should currently be about 53 inches. Futz Critter machine is a 4+3 with spacers... they absolutely help with the tippyness. You should end up at 55 inches adding those. I have spacers ordered as well, I did the 1.5 inches for the back and should end up being 56 inches.

It this case extra inches matter.

 

[Mopower58]

Trailer is vented and I would put a carbon monoxide/smoke detector in it so I was thinking a wall mount propane panel heater. We will see. A/C will come first. lol I can double layer sleeping bags and blankets to help with colder nights when needed for now.

When I put the air in our enclosed I got the heat strips in it and it kept it decently warm and it was a 36 foot gooseneck.