P1000 Don't give up low range

[Plowboy1466]

I've only seen it a once on here, but I lost low range and the problem was the sleeve on the cable that came uncrimped. I almost spent $600 to rebuild the sub-trans for no reason. FYI

 

[Admin]

 

[P1K5Dave]

Cool. Can you get any pics of where the cable went bad?

 

[DG Rider]

I've only seen it a once on here, but I lost low range and the problem was the sleeve on the cable that came uncrimped. I almost spent $600 to rebuild the sub-trans for no reason. FYI

That must be what's wrong with my 700...

 

[john790]

I dont need a picture which end toward the sub.

 

[Plowboy1466]

I dont need a picture which end toward the sub.

This is a picture straight down from the seat frame. Inside of the rubber bellow is the cable and the sleeve. The sleeve needs to be crimped into the cable housing by the mount at the sub-trans.

 

[Plowboy1466]

Cool. Can you get any pics of where the cable went bad?

Glad to hear from you Dave. It was your thread that I got most of my research from. I kinda wish l had to tear it apart to install the talon gears, but, if it's not broke, l'm not going to fix it. Great job on your post!!!