P500 For those who have used a Kill switch as an antitheft device on the Pioneer 500

[Bcraig]

For those who Have used a Kill switch as Part of an anti theft strategy to help stop thieves
How do you do it ?
I have never wired a Kill switch on a SXS or a Vehicle and not much of a mechanic.

Thanks

 

[Admin]

 

[toddvdh]

I would wire it in to cut the spark (CDI), or cut the fuel pump.

I had one like this on my old raptor 660. That way I could just take the teather with me.

 

[Bcraig]

Thanks ,I appreciate your help

 

[toddvdh]

I was hoping someone who knows more than me would chime in. Lol

 

[BrianM]

I wired in a remote control relay to the fuel pump circuit. Every time I turn on the key I push the remote button to energize the fuel pump circuit prior to cranking the engine.

Here is what I used.

https://www.amazon.com/gp/product/B00EQB8O7K/?tag=sxsweb24-20

Because I'm paranoid I also wired in a fuse holder (which I leave empty) in parallel with the relay so that in the event the remote batteries died in the remote I could plug a fuse into the holder.

https://www.amazon.com/gp/product/B000NCOKZQ/?tag=sxsweb24-20

I did this on a Talon but I suspect that that the wiring is almost the same on a Pioneer.

 

[Bcraig]

I wired in a remote control relay to the fuel pump circuit. Every time I turn on the key I push the remote button to energize the fuel pump circuit prior to cranking the engine.

Here is what I used.

https://www.amazon.com/gp/product/B00EQB8O7K/?tag=sxsweb24-20

Because I'm paranoid I also wired in a fuse holder (which I leave empty) in parallel with the relay so that in the event the remote batteries died in the remote I could plug a fuse into the holder.

https://www.amazon.com/gp/product/B000NCOKZQ/?tag=sxsweb24-20

I did this on a Talon but I suspect that that the wiring is almost the same on a Pioneer.

Thanks for the information