P1000 Fox QS3 with a lift kit?

[JTW]

I just installed a set this weekend along with some mud busters. I need to turn the rear reservoirs in as they will hit the tire in extream conditions.

View attachment 66511 View attachment 66512 View attachment 66513 View attachment 66514

Do you have a high lifter lift?

 

[Admin]

 

[boatman22]

Yes:
2.5" Signature Series Lift Kit Honda Pioneer

 

[JTW]

Yes:
2.5" Signature Series Lift Kit Honda Pioneer

You’re going to need washers on your upper shock eyes between the spacers.

 

[boatman22]

Yep,they came with the lift.

 

[JTW]

Yep,they came with the lift.

Really?? They haven’t been doing it long. That’s good!

 

[zmnypit]

Note: Honda Pioneer LE models require 1" wheel spacers with stock and aftermarket wheels. Same would apply to non LE models if running their lift with fox shocks. I removed my lift last week and plan on fabing lower control arm lift brackets for this reason.

 

[boatman22]

Note: Honda Pioneer LE models require 1" wheel spacers with stock and aftermarket wheels. Same would apply to non LE models if running their lift with fox shocks. I removed my lift last week and plan on fabing lower control arm lift brackets for this reason.

I ordered 1.5" spacers for the rear from RB3 and will install this weekend.

 

[Sly_johnson38]

Did you jack the vehicle up and push the a arm down?

Yes it took some elbow grease but I was able to get them on, thanks.

 

[zmnypit]

I ended up taking the rear lift brackets off mine as the rear tires set V and the shocks we're stiff. The front bracket I moved the shock mounting holes in about 1.5" cutting the excess off. So I have the modified lift brackets on the front and none on the rear. Looks good and rides even better.

 

[jtb33]

I realize this is an older thread, but I am looking to get the Fox shock upgrades and right now, I have a high lifter 2.5" kit on with 30" tires. If I get the QS-3 shocks, here are my questions:

1 - If I leave the high lifter kit on, what kind of washers/spacers do I need to get?
2 - Can I remove the high lifter kit and still run 30" wheels with just the fox QS-3 shocks (stock A-arms)?