P500 Giving her a little more umfff

[Peter_72]

About too install a 35% gear reduction, no more struggling to turn those heavy 28’s.....my axles are going to hate me!

 

[NTCPrezJB]

About too install a 35% gear reduction, no more struggling to turn those heavy 28’s.....my axles are going to hate me!View attachment 262334View attachment 262335

I'm looking forward to viewing the results.

 

[Peter_72]

I'm looking forward to viewing the results.

It will be next week sometime before the speed healer is delivered, hopefully I’ll get to give it a test drive by the end of next week. The real test will come mid April when we’re camping at Sabine ATV park!

 

[906UP]

As long as your in there.. 520 kit?

 

[Peter_72]

As long as your in there.. 520 kit?

I wouldn’t mind but she only has 650 miles

 

[Peter_72]

Speed healer is here! It should be ready in a couple of days

 

[Montecresto]

About too install a 35% gear reduction, no more struggling to turn those heavy 28’s.....my axles are going to hate me!View attachment 262334View attachment 262335

Wow!!!!!
Where’s it install? Will it reduce all 5 gears? Low is going to be amazing....😂

 

[Peter_72]

Wow!!!!!
Where’s it install? Will it reduce all 5 gears? Low is going to be amazing....😂

It’s installed in the transmission and it does reduce all gears!

 

[Peter_72]

Everything is installed and working, the torque is crazy! Getting the speed healer set up took several tries, following the directions got me close but I had to go the trial and error route to get it to run without it throwing a fault and stop shifting.

First thing was to see what the top speed is....I ran it up to 32 mph but it was screaming, 28 is about as much as I want to hear it going. Once when it through a fault I came to a complete stop and took off again pretty easy with it still in 5th gear

 

[906UP]

Everything is installed and working, the torque is crazy! Getting the speed healer set up took several tries, following the directions got me close but I had to go the trial and error route to get it to run without it throwing a fault and stop shifting.

First thing was to see what the top speed is....I ran it up to 32 mph but it was screaming, 28 is about as much as I want to hear it going. Once when it through a fault I came to a complete stop and took off again pretty easy with it still in 5th gear

I went through the same trial & error with the Speedo DRD when I did the gear mod on the Donkey

 

[Peter_72]

I went through the same trial & error with the Speedo DRD when I did the gear mod on the Donkey

Did you use the one from 12 o’clock labs or from somewhere else?

 

[906UP]

Did you use the one from 12 o’clock labs or from somewhere else?

Same one, although that was a couple years ago, I think the design has changed slightly since then