P1000 Honda Roof + SuperATV Flip Up Windshield Clamp Question

[tigerj]

Hi All,

New here so bare with me. Pioneer 1000-5 DLX

Are the OM Honda Hard Roof Clamps the least bit adjustable as far as sliding them horizontally on the roll bar towards center to accommodate SuperATV Clamps for flip up windshield?

It looks like the clamps for windshield do not have enough space to the left of roof clamps unless i move the roof clamps.

I dont want to throw the roof out of alignment or cause improper mounting/noise with moving clamp angle. Any cautions here?

Suggestions?

Perhaps the window clamp will fit alongside though there does not appear to be enough space.

Pictured below is current roof, the location of current roof clamp, and windshield instructions for clamp placement.

 

[Admin]

 

[Hondasxs]

It does fit as I just installed.
Your roof clamp does look like it needs adjusting.
I'll snap a pic here in sec.

I dont recomend following the instructions.
It showes mounting the brackets to the windshield them installing whole.

I recomend installing the brackets on the roll bars first. Then install the windshield. I did it myself but a second person to help hold it up would be great.

 

[Hondasxs]

Oh, I see now...
your roof clamp is backwards.

 

[HondaTech]

Oh, I see now...
your roof clamp is backwards. View attachment 169449

I was gonna say something didny look right, but I dont have anything in front of me to reference.

 

[Russ989]

Hi All,

New here so bare with me. Pioneer 1000-5 DLX

Are the OM Honda Hard Roof Clamps the least bit adjustable as far as sliding them horizontally on the roll bar towards center to accommodate SuperATV Clamps for flip up windshield?

It looks like the clamps for windshield do not have enough space to the left of roof clamps unless i move the roof clamps.

I dont want to throw the roof out of alignment or cause improper mounting/noise with moving clamp angle. Any cautions here?

Suggestions?

Perhaps the window clamp will fit alongside though there does not appear to be enough space.

Pictured below is current roof, the location of current roof clamp, and windshield instructions for clamp placement.

View attachment 169446 View attachment 169447 View attachment 169448

It will all fit and yes those front clamps have some adjustment. Your windshield clamps will sit very close to the roof clamps as you can see in the video below.

 

[tigerj]

Oh, I see now...
your roof clamp is backwards. View attachment 169449

is it really?
the dealer installed it!
this windshield is my first install (& brand new pioneer so learning!)

would you all recommend taking off entire roof and doing properly then windshield

or

can i just unmount this backwards clamp, slide it over and proceed w windshield?

thanks for tip re clamps first then windshield

 

[tigerj]

It will all fit and yes those front clamps have some adjustment. Your windshield clamps will sit very close to the roof clamps as you can see in the video below.

thank you

 

[Russ989]

thank you

Welcome, there is a part 1 as well but that should get you fixed up.

 

[tigerj]

Oh, I see now...
your roof clamp is backwards. View attachment 169449

this isn't my roof...hmm

this is, pics below:

please advise if correctly installed

 

[Hondasxs]

I wouldn't remove the roof. Maybe that clamp and bracket since it's wrong. Then work on fixing that later.
It looks like the bracket may be bent as well.

 

[Hondasxs]

P1k-5 - HARD ROOF 5P - 0SR85-HL4-101 - Instructions

 

[tigerj]

I wouldn't remove the roof. Maybe that clamp and bracket since it's wrong. Then work on fixing that later.
It looks like the bracket may be bent as well.

my question is
are they all wrong
i see what y'all are saying

SO APPRECIATED EVERYONE

below is the front roll bar with all of my clamps as installed by dealer.

are all backwards?

 

[Russ989]

my question is
are they all wrong
i see what y'all are saying

SO APPRECIATED EVERYONE

below is the front roll bar with all of my clamps as installed by dealer.

are all backwards?

View attachment 169492

I’ll take a pic of mine, give me second.

 

[Russ989]

my question is
are they all wrong
i see what y'all are saying

SO APPRECIATED EVERYONE

below is the front roll bar with all of my clamps as installed by dealer.

are all backwards?

View attachment 169492

It’s all wrong, your side clamps are on the brackets wrong and so are your center brackets.

 

[HondaTech]

Not only are the clamps on upside down, but there also on the wrong side of the bracket.

The 2 outer clamps should be mounted to the long side of the metal bracket. I'd follow the instructions and look at the all the clamps to make sure its mounted properly.

I'd wage a guess the rear net mounts are inserted in the webbing wrong as well, almost everyone I see from other dealers is. Abernathys is pretty known for it around our dealership.

 

[HondaTech]

It’s all wrong, your side clamps are on the brackets wrong and so are your center brackets.

View attachment 169493 View attachment 169494 View attachment 169495

Your 2 center brackets are on backwards, his are correct.

 

[tigerj]

It’s all wrong, your side clamps are on the brackets wrong and so are your center brackets.

View attachment 169493 View attachment 169494 View attachment 169495

wow.
so, with this new knowledge that all clamps are wrong

STEP 1. Remove Roof & Redo?
(i could have dealer redo but might be nice to know its done right-myself)

Step 2. Roof first then windshield?

here is a photo of center and back bars

 

[Russ989]

Your 2 center brackets are on backwards, his are correct.

Indeed you are correct, I was just looking at the instructions and noticed that.

 

[HondaTech]

wow.
so, with this new knowledge that all clamps are wrong

STEP 1. Remove Roof & Redo?
(i could have dealer redo but might be nice to know its done right-myself)

Step 2. Roof first then windshield?

here is a photo of center and back bars

View attachment 169496 View attachment 169497

The only thing incorrect on your setup is the 2 front outer clamps. The rest are correct.

 

[tigerj]

Not only are the clamps on upside down, but there also on the wrong side of the bracket.

The 2 outer clamps should be mounted to the long side of the metal bracket. I'd follow the instructions and look at the all the clamps to make sure its mounted properly.

I'd wage a guess the rear net mounts are inserted in the webbing wrong as well, almost everyone I see from other dealers is. Abernathys is pretty known for it around our dealership.

when i removed rear nets i knew something wasn't right