P1000 Honda Roof + SuperATV Flip Up Windshield Clamp Question

[BigOL3]

will need some encouragement regarding said hills! i haven't cared for them since a child and there's one climb and descent quite steep i always steer clear!

definitely want to see the p1000-5's at their best

i believe it all began one fateful morning turkey hunting with my father and falling on a hill and my gun went off...

downhill, pun intended, from there!

That P1K is a virtual mountain goat!

 

[Admin]

 

[bs4u00]

One more tip, leave all the roof clamps loose until you have the windshield fully installed.

 

[tigerj]

It will all fit and yes those front clamps have some adjustment. Your windshield clamps will sit very close to the roof clamps as you can see in the video below.

russ, do you have a link to part 1 of your video? thanks!

 

[Russ989]

russ, do you have a link to part 1 of your video? thanks!

 

[tigerj]

sorry everyone, i have some neuro issues at hand but can't seem to figure out how to remove clamp? there should be somewhere to loosen & guidance on what tool would be appreciated.

i have loosened roof bracket screws, the other 2 screws on bracket don't seem to accept my 4mm hex-do they affect clamp opening or just attach clamp to bracket

the backwards install has me backwards sideways and totally confused!

clamp roll bar adjustment loosening tips helpful & appreciated.

i can open clamp but not remove it (or move it) from bar

will switch their position and outside front brackets as well when loose.

pics of as is

 

[Russ989]

sorry everyone, i have some neuro issues at hand but can't seem to figure out how to remove clamp? there should be somewhere to loosen & guidance on what tool would be appreciated.

i have loosened roof bracket screws, the other 2 screws on bracket don't seem to accept my 4mm hex-do they affect clamp opening or just attach clamp to bracket

the backwards install has me backwards sideways and totally confused!

clamp roll bar adjustment loosening tips helpful & appreciated.

i can open clamp but not remove it (or move it) from bar

will switch their position and outside front brackets as well when loose.

pics of as is

View attachment 170486 View attachment 170487 View attachment 170488

 

[tigerj]

thanks russ!

View attachment 170491

View attachment 170491

THANK YOU! i'm a visual learner this is amazing

how do i loosen the clamp? it should be so simple

 

[Russ989]

thanks russ!



THANK YOU! i'm a visual learner this is amazing

how do i loosen the clamp? it should be so simple

You’ll have to use an Allen wrench on the back side of the clamp to take it off the bracket and then use it again on top of the roof. Then spin the clamp down to you so you can unbuckle it and take it off. Your welcome buddy.

 

[Smitty335]

thanks russ!



THANK YOU! i'm a visual learner this is amazing

how do i loosen the clamp? it should be so simple

I just have to laugh, I wad up the instructions to build a fire with, before I start the install and never read them! HA! Got a Grandson coming March, a couple of years from then I will be assembling some yard play stuff, should be interesting!

 

[Russ989]

I just have to laugh, I wad up the instructions to build a fire with, before I start the install and never read them! HA! Got a Grandson coming March, a couple of years from then I will be assembling some yard play stuff, should be interesting!

You’re interesting by yourself Smitty, you don’t need help!