Intake snorkel

[BigOL3]

Finally took time to modify intake and attach the hose for the snorkel. Will add a clamp at the base. It tucks in under dash nice and tight.

Sent from my SM-G965U using Tapatalk

 

[Admin]

 

[K9Paco]

Gonna have to put something to keep that pre-filter in place. Can use some panty hose or I just used screws.



Sent from my iPhone using Tapatalk

 

[BigOL3]

Gonna have to put something to keep that pre-filter in place. Can use some panty hose or I just used screws.
View attachment 82492


Sent from my iPhone using Tapatalk

Lol ..... I am the one that mentioned putting the screws in the tube. On this tube it has a big spring fitted inside of it.

 

[tbaker]

What's the part number for that hose

 

[K9Paco]

Lol ..... I am the one that mentioned putting the screws in the tube. On this tube it has a big spring fitted inside of it.

Mine does too. It still sucked it down around the first elbow.


Sent from my iPhone using Tapatalk

 

[BigOL3]

What's the part number for that hose

https://www.amazon.com/gp/product/B000CRBPIW/?tag=sxsweb24-20

 

[AVDV]

what is the real purpose of that hose

 

[BigOL3]

what is the real purpose of that hose

Better protection from water intrusion, and opens up more space under hood where air box was.

 

[JTW]

Annnnnd you get to tell the ladies you’ve got a big black hose under the hood!!

 

[BigOL3]

Annnnnd you get to tell the ladies you’ve got a big black hose under the hood!!

haha ..... dontcha know it!

 

[AVDV]

Better protection from water intrusion, and opens up more space under hood where air box was.

If you drive in water that is a waste of time.All you are doing is moving it back under the hood more. If you are going to snorkel it run it up along roll gage

 

[BigOL3]

If you drive in water that is a waste of time.All you are doing is moving it back under the hood more. If you are going to snorkel it run it up along roll gage

NO, first it is raise slightly higher than original, so that is a benefit. Second, I have NO intention of playing submarine, I do not need it on the rollcage. If water is 'splashed up under the hood, it has less chance of getting into the hose in that location. By removing the old air box I have more room under hood.

 

[AVDV]

NO, first it is raise slightly higher than original, so that is a benefit. Second, I have NO intention of playing submarine, I do not need it on the rollcage. If water is 'splashed up under the hood, it has less chance of getting into the hose in that location. By removing the old air box I have more room under hood.

ok I see what you are saying, couple of curves help too.

 

[CFarrell71]

Gonna have to put something to keep that pre-filter in place. Can use some panty hose or I just used screws.
View attachment 82492


Sent from my iPhone using Tapatalk

I bought that hose but I am having a very hard time getting it to fit... Any suggestions..

 

[K9Paco]

I bought that hose but I am having a very hard time getting it to fit... Any suggestions..

Use 3-4 screws. Mine don’t go all the way through but they go most of the way across.


Sent from my iPhone using Tapatalk

 

[K9Paco]

I bought that hose but I am having a very hard time getting it to fit... Any suggestions..

Sorry. Just reread your post. I just worked it on there. Maybe letting it warm up in the sun first would make it more pliable.


Sent from my iPhone using Tapatalk

 

[CFarrell71]

Sorry. Just reread your post. I just worked it on there. Maybe letting it warm up in the sun first would make it more pliable.


Sent from my iPhone using Tapatalk

Thanks!

 

[Robobrainiac]

I just ordered mine. I know this is an old thread but I have heard the wisest things get better with age. Does anyone use a pre filter on these?

 

[K9Paco]

Some do. I just used the stock one at the end of the hose.


Sent from my iPhone using Tapatalk

 

[bumperm]

I bought the parts awhile back, including the filter. Decided not to use the rubber hose as there was really no room for it, and I didn't want to rearrange my "under hood" to gain and maybe 3 or 4 inches in intake altitude.

Filter