P1000 Snorkel behind passenger seat?

[Eam22357]

I looked for a thread but could not find one. How is everyone routing their snorkels? I want to run from the air box intake up and above the passenger seat. There isn’t a whole lot of clearance between the bed and area for getting the snorkel up. Any feedback is appreciated.

 

[russknight]

I think you'll have to trim the bed to do that. I think I'll eventually do it that way.

 

[Eam22357]

Well I got it figured out. Had to trim a minimal amount out of the bed where it meets the center roll cage

 

[DrShotgun]

Well I got it figured out. Had to trim a minimal amount out of the bed where it meets the center roll cage

View attachment 252463

Can we see the rest of it under the bed? Also maybe a parts list? TIA

 

[Eam22357]

Can we see the rest of it under the bed? Also maybe a parts list? TIA

I used a piece of flex pipe I had from my dust collection system and a 2” piece of schedule 40 pvc and a coupling so the OD would fit in the stock air box elbow and clamp.

 

[Eam22357]

 

[pct]

I posted the one I made I don't know how to post a link it was named yet another snorkel if you have questions just ask
and Welcome to the club from WV

 

[Eam22357]

I posted the one I made I don't know how to post a link it was named yet another snorkel if you have questions just ask
and Welcome to the club from WV

Cool! Thank ya!

 

[hibbert]

Take a look at SNORKEL KIT for 2016, 2017, 2018, 2019 Honda Pioneer 1000-5 and 1000-3 UTVs | eBay

 

[Brett002]

@Eam22357 There is a way to come directly off the air intake rubber 45 with pvc then around behind fuel tank then up passenger side rops. This is the route that I took. If routed correctly you won't even notice it's there... Well until you open her up

 

[Brett002]

I also capped off my factory stuff in the floor and under the hood with the lids off of jelly jars and the factory clamps so that it can be returned to stock if need be.

 

[el-phantasmo]

I'd like to see more pictures of your setup. Looks like a great idea.

Sent from my SM-G960U using Tapatalk

 

[Alaska350]

View attachment 252604View attachment 252605View attachment 252606
@Eam22357 There is a way to come directly off the air intake rubber 45 with pvc then around behind fuel tank then up passenger side rops. This is the route that I took. If routed correctly you won't even notice it's there... Well until you open her up

Please post a pic of how it’s run and which size pvc did you use?