P1000m5 Light Bar/Cube Locations

[Bradley-Thornton]

Post #89

P1000 - Mud Riding Build 32in tires 34in tires

Clearance before 17 3/4 after 18in so after settle I would say no extra clearance but you could by tuning the spring tension up. Added the 814s shocks took them to the takeover for my first ride on them. (They worked way better then stock but I'm still adjusting them so will give a full...

hondasxs.com

Post 29 and 34 of link.

P1000 - Pictures of a 14" light bar in front bumper please?

This Auxbeam cheaper and 120 watt if you needed extra juice. Auxbeam® 22" 120W Curved LED Light Bar 12000lm PHILIPS Combo Beams for Off-Road | eBay Sent from my iPhone using Tapatalk

hondasxs.com

 

[Bradley-Thornton]

P1000 - Honda Pioneer 1000 DIY High Beam Trigger Wire Harness

I bought this and wanted to give a review it is the most simple add-on you will ever do. Just unplug and plug in. It is just a red and black wire so just connect to your red and black wire on your light and you are done. As it states when you turn your high beam on the high beam and the light...

hondasxs.com

 

[Bigjim]

On the older style headlight ATV’s, the light bar was a great improvement. I pit the 12” light bar on top of the front bumper on the LE edition 1000-5. Because of the factory led headlights (which work great and are powerful),I found the light bar to help a little bit more.I have them wired into the high beam with a separate switch to turn them off. It is nice to have a backup system and it does look good on the bike. Overall, I would still put it on.