Little more power

[TalonR65]

Not this one EVOLUTION POWERSPORTS

I also like the stock exhaust quietness. Loud pipes don’t make you perform much better for the $ spent. Huge tires may look cool but raise havoc on suspension, drive train etc. SXS s all have limits.

 

[Admin]

 

[TalonR65]

I climbed the devils elbow @ windrock when all the razors were setting at the bottom scared to go up it. But at the top I high centered and had to winch about 2 feet. So going down on tire size is not an option. It had the power to do it just looking for that little bit more

Get one of these

 

[PaulF]

I climbed the devils elbow @ windrock when all the razors were setting at the bottom scared to go up it. But at the top I high centered and had to winch about 2 feet. So going down on tire size is not an option. It had the power to do it just looking for that little bit more

Have you considered 35's and 25% or 30% Internal Gear Reduction? You would gain some more ground clearance and get your torque back. For climbing, I think this would be the ticket.

 

[jtucker]

Who sales a gear reduction for a talon

 

[Sheetmetalfab]

Who sales a gear reduction for a talon

portals gdp (15 or 35%) or reduction Boss. IGR (25%)

 

[aauman88]

Portals and tuned get frowned upon here for some reason or at least they do on the Pioneer side. But I have both and am very pleased. Complete Off-road Powersports out of Texas did my tune with a PowerVision 3 so I’d recommend them to you Talon guys the same. Just my opinion though

 

[jtucker]

I though you knew of something that went in the rear and front ends. I dont want to do portals

 

[aauman88]

I though you knew of something that went in the rear and front ends. I dont want to do portals

Same place I said above is doing internal trans work as well. I haven’t done it so can’t comment much on it

 

[PaulF]

I though you knew of something that went in the rear and front ends. I dont want to do portals

There is an Internal Gear Reduction available for the Talon. I think it is currently only available in 25%. Look here...

Reduction Boss Machining

Reduction Boss Machining. 11,618 likes · 23 talking about this. Gear reductions for Honda ATV/SxS with focus on top quality. Standardized sizes, new billet gears.

www.facebook.com

 

[PaulF]

Here is a video testing 35's in low with 25% IGR...

https://www.facebook.com/video.php?v=554036888487380

 

[SLOWPOKE693]

Did they dyno tune you rig or just sell you a pre written tune? I'm in Texas, building a Talon R short course car and need a good tuner to get my setup dialed in.

 

[aauman88]

If you mean mine it was specified to my rig. Told him my upgrades and what I wanted it to do and he did custom tune for it

 

[SLOWPOKE693]

If you mean mine it was specified to my rig. Told him my upgrades and what I wanted it to do and he did custom tune for it

Sorry, thought I quoted your original post.

I looked at their FB page a few minutes ago. I'll definitely be giving them a call. That's exactly the kind of shop I'm looking for. Thanks!

 

[aauman88]

Sorry, thought I quoted your original post.

I looked at their FB page a few minutes ago. I'll definitely be giving them a call. That's exactly the kind of shop I'm looking for. Thanks!

They are great to work with. They have tuned mine and another buddies 1000’s.

 

[PaulF]

If anyone is interested (or curious), I was able to contact Danielle at Reduction Boss Machining. Here is the scoop on the Talon IGR...

• They offer 25% gear reduction.
• They are currently 4 to 6 weeks out (mainly due to material supply issues). You need to contact them to get on a waiting list.
• Once they are ready for you, you must send them your Rear Cover Spacer and Bare Clutch Hub from your machine (or buy new ones if you don't want any down time but they are very expensive ~$800).
• Kit price is $1,150. Not sure if that includes a few required gaskets and o-rings or not, I will find out.
• You will need 2 SpeedoDRD units to correct the shifting and another for the speedo if you want to correct that. They are about $70 each.

 

[Brussian]

I just installed an evolutions slip on exhaust that they clam adds 4 hp. I like the exhaust cause it is only 4 dB louder than stock but has a deep tone to it. So I can’t really tell if I have more power or not but for under $500 might be a good option

 

[ScottyP123]

Agreed on not going back to 28's no matter the power loss. I need all the ground clearance I can get.

View attachment 203766

What Skid plate is that?

 

[Lil_Steve]

What Skid plate is that?

Trail Armor full skid and side plates

 

[ScottyP123]

Trail Armor full skid and side plates

View attachment 204670

Nice! Thanks

 

[jtucker]

trail armor is the best I have found