P700m4 Modifications finished! For now...

[JaLerz]

Here are pictures of my mods and accessories on my 2017 Honda Pioneer 700-4 in Phantom camo or "Pino" as we call her. Picked up her used with 200 miles on it for 11k.

Full hard top.
Full one piece Windshield (adjustable)
Rear Viee Mirrow
Bed liner made from Horse Stall Mat
4 way Reese Hitch
Adjustable rear/side LED Light Pods
4500lb winch
14inch LED Light Bar
Artic Cat Rifle Case
6 rocker switch dash kit: Front Light Bar, Rear Light Pods, Winch, Reverse Override, Blank, Double USB

Oh and my custom beat down stick for neighborhood dogs.

Let me know what you guys think.

Thanks for all the help along the way, this is a great forum.

 

[Admin]

 

[alloutdoors]

Very nice work and like the rubber mat in bed as well as the lab One comment, however, you may consider a better lynch pin (what is holding in place) on the receiver; that is, I had a set up like that and twice running through high grass the safety pin which holds the lynch pin was pushed out and had to go back and find the receiver, so something to consider, perhaps like this
5/8″ Hitch Pin w/ Lynch Pin – 3-1/2″ – BHI BP5835/LP8453 | Camco Trailer Parts & Accessories

 

[JaLerz]

Very nice work and like the rubber mat in bed as well as the lab One comment, however, you may consider a better lynch pin (what is holding in place) on the receiver; that is, I had a set up like that and twice running through high grass the safety pin which holds the lynch pin was pushed out and had to go back and find the receiver, so something to consider, perhaps like this
5/8″ Hitch Pin w/ Lynch Pin – 3-1/2″ – BHI BP5835/LP8453 | Camco Trailer Parts & Accessories

Great advice. I'm on ii

 

[Sheepdog]

Great job!!

 

[Gator]

I have another comment about the hitch. Do a search on hitches in this forum. The 700 is weak back there. Several of us ripped them out. If you can weld, you will want to reinforce the receiver so that doesn't happen. I think there is one to be purchased but I can't recall the name.

Good work on everything.

 

[Max718]

Looks good ! Now go riding and enjoy it

 

[JaLerz]

@Max718 @Sheepdog Thanks! The wife, choclate lab and the 9 month old daughter have been enjoying it every day! Can't wait to put some wild game in the back of it though!

@Gator Thank you for the much appreciated advice. Saved me a huge headache. Did it cause major damage to anything or just rip it out? Were you towing or trying to pull on something? Has anyone done a write up on the mod?

 

[70Bones]

Very nice work and like the rubber mat in bed as well as the lab One comment, however, you may consider a better lynch pin (what is holding in place) on the receiver; that is, I had a set up like that and twice running through high grass the safety pin which holds the lynch pin was pushed out and had to go back and find the receiver, so something to consider, perhaps like this
5/8″ Hitch Pin w/ Lynch Pin – 3-1/2″ – BHI BP5835/LP8453 | Camco Trailer Parts & Accessories

Interesting, I noticed the safety pin on my hitch pin missing last week. I never considered that sticks might drag it out. Thanks!!!

 

[Gator]

@Max718 @Sheepdog Thanks! The wife, choclate lab and the 9 month old daughter have been enjoying it every day! Can't wait to put some wild game in the back of it though!

@Gator Thank you for the much appreciated advice. Saved me a huge headache. Did it cause major damage to anything or just rip it out? Were you towing or trying to pull on something? Has anyone done a write up on the mod?

Any upward load will do it such as plowing a food plot. In my case I got stuck and used a 4 wheeler to pull me back out. That's all it took. A friend of my crossed a log and his trailer ball bumped as he drove over it.

You can search the forum and you will find some of the damaged hitches and see the solutions.

 

[allgm1]

yup this was a problem for sure. mine got it from a rock as the rear tires came off another one. I don't keep the ball on there unless I need it anymore.