P1000 New Member, First Post...

[Plongson]

Just joined up and this is the first post, hung around at another forum, but it was a bit slow. Look forward to some good stories here and participating as well.

Just hit the 100 mile first service and it went well, pulled the skid plate (fortunate to have a shop and a hoist...) to avoid making a huge mess and she is running great. I've had great luck with Honda's products for years and this one is no exception. My only complaint is the dang straight cut gears in the rear differential howl...I'm guessing it's normal, but it sure is noisy...anyone else have a comment on differential noise??

FYI...got about 20 mpg on the first tank. Fuel started to flash with about 2.5 gallons left.

I read here it's customary to add a picture of your ride on the first post, so here goes.

Southern Utah

• Plongson
• May 18, 2017

On the Hoist...

• Plongson
• May 18, 2017

Riding Buddies

• Plongson
• May 18, 2017

 

[GlockMeister]

Welcome from SE Missouri! Glad you decided to join us....It normally don't get to slow around here and there are plenty of stories.nice pics as well.

 

[drfubar]

Welcome from SE Tennessee. Watch out for that @GlockMeister guy.

 

[GlockMeister]

Welcome from SE Tennessee. Watch out for that @GlockMeister guy.

Says the man in a dress

 

[drfubar]

Says the man in a dress

Yes, well, it was the Tequila

 

[elkguide]

Glad that you joined us. Lots of good info and there also is a little bit that you should take with "that proverbial grain of salt."

Looks like a sweet ride and an great shop to play in!

ENJOY!!!!!!!!!!!!!

 

[DTAGG]

welcome aboard. i also have the diff noise and used lucas 75140 fluid which helped a bit but it it still noisy.

 

[Eltobgi]

Welcome to the forum! That is a very impressive shop congrats on doing the first service yourself.

 

[Gator]

I'm digging the shop too.

 

[Hondasxs]

Welcome to the club...
Buckel your seat belt... these guys keep this place on fire!
All of them are great and will help with whatever... Just ask.

As for your pioneer. 100 miles you say!. Give it some more time. The gears will polish out and changing to a better oil helps too.
Thanks.

 

[Ragnar406]

Welcome from North West AR

 

[Jimmy-AZ]

Welcome to the forum! That is a very impressive shop congrats on doing the first service yourself.

Ditto that, I would give my left arm for the lift. But wait.......... it takes to hands for me to get anything done.

Welcome from AK

 

[rocmar]

Kool pics...
love the dogs

 

[1BadDart]

Welcome from W. KY. Lots of good folks here.

 

[vince]

welcome aboard

 

[JTW]

Welcome.. looks like pretty country your in! We want more pics of the shop! What size is it? 16ft eves?

 

[Tigermark]

Welcome to the forum family from NW Arkansas! Good looking riding buddies! Like @JTW said, more shop pics!

 

[Plongson]

I'm not starting a new thread for these pictures, but some of you asked for pictures of the shop.Outside and one inside with the bathroom. We used heavy gauge corrugated with no finish, to let it rust and look like an old machine shop. Used the left over to "wallpaper" the toilet area.

 

[Jimmy-AZ]

I'm not starting a new thread for these pictures, but some of you asked for pictures of the shop.Outside and one inside with the bathroom. We used heavy gauge corrugated with no finish, to let it rust and look like an old machine shop. Used the left over to "wallpaper" the toilet area.

View attachment 44034 View attachment 44035 View attachment 44036 View attachment 44037 View attachment 44038 View attachment 44039 View attachment 44040

 

[Jimmy-AZ]

What a great sophisticated shop. I am so envious