RB3offroad HONDA TALON BILLET STEERING RACKS

[RB3offroad]

RB3 is proud to announce our billet steering rack for the Honda Talon 1000R and Talon 1000X(non live valve). , the new Honda Talon billet steering rack gives you all of the security and reliability that you need out of your Honda Talon. Constructed from 6061 billet aluminum, the new Talon steering rack also consists of; hardened 4130 pinion gears, upgraded seals and bearings, easy to reach grease fittings, and anodized for long term reliability and protection.

KOH tested
Won a championship - Factory Honda

 

[Admin]

 

[IDIOT]

Would love to see a real world review on this by one of the forum members, somebody buy it and install it and give us some feed back please.

 

[Lil_Steve]

Is this available exclusively through Jsport or can I get it directly from you since you're local to me?

 

[RB3offroad]

Is this available exclusively through Jsport or can I get it directly from you since you're local to me?

you can buy it local through rb3offroad

 

[RB3offroad]

Would love to see a real world review on this by one of the forum members, somebody buy it and install it and give us some feed back please.

slowpoke on here has it and races with it

 

[IDIOT]

Slowpoke...whadda ya think?

 

[RB3offroad]

SLOWPOKE693​

 

[Sheetmetalfab]

I have one also.

 

[SLOWPOKE693]

SLOWPOKE693​

Trust me when I say you guys want one of these. I swapped out my stock rack at 100 miles with an RB3 billet rack and instantly noticed a big difference in steering feel and response over stock. Its much tighter and smoother now! 😎

And as an added bonus....... RB3's rack doesn't use the factory Honda pinion gear unlike another company out there making these.

 

[RB3offroad]

Trust me when I say you guys want one of these. I swapped out my stock rack at 100 miles with an RB3 billet rack and instantly noticed a big difference in steering feel and response over stock. Its much tighter and smoother now! 😎

And as an added bonus....... RB3's rack doesn't use the factory Honda pinion gear unlike another company out there making these.

View attachment 274506

Thanks for your review

 

[2021LiveValve250R]

@RB3offroad any plans on a LV version for the R?

 

[Montecresto]

How about X4 LV while you’re at it???

 

[RB3offroad]

its in the plans

 

[Sheetmetalfab]

Trust me when I say you guys want one of these. I swapped out my stock rack at 100 miles with an RB3 billet rack and instantly noticed a big difference in steering feel and response over stock. Its much tighter and smoother now! 😎

And as an added bonus....... RB3's rack doesn't use the factory Honda pinion gear unlike another company out there making these.

View attachment 274506

I can attest to the same results.

I’m running portals on my X4 and an upgraded steering motor.

The RB3 steering rack took all the slop and kick out of my steering. (Oem rack had 1/8-3/16” of slop at 1250 miles)

Just made a banzai run last night with a batch of young boys, 57 mph (30% geardown portals on the rev limiter) through 2-3’ whoops and lots of high speed sand trails.

Noticeably less feedback through the steering wheel and a much improved precise feel.

 

[Lil_Steve]

The RB3 steering rack took all the slop and kick out of my steering. (Oem rack had 1/8-3/16” of slop at 1250 miles)


Noticeably less feedback through the steering wheel and a much improved precise feel.

This is why I'm interested, my rack has play and no longer feels precise. Are you still running the stock inner tie rods?

 

[Sheetmetalfab]

This is why I'm interested, my rack has play and no longer feels precise. Are you still running the stock inner tie rods?

Yes.
Oem inners (I carry spares and this is the “fuse”)
CA barrels and FK outer rod ends.
Jsport outer hardware. (CA hardware wouldn’t work with portals)