P500 Rear wheel adjustment

[Amitchellr]

Installed new wheels and tires and it looks like the rear passenger tire has positive camber vs. the rear driver. Wheel is seated against the hub and torqued to Honda spec. Is there anyway to correct it or are my eyes playing tricks. Thanks for the help.

 

[Smitty335]

Installed new wheels and tires and it looks like the rear passenger tire has positive camber vs. the rear driver. Wheel is seated against the hub and torqued to Honda spec. Is there anyway to correct it or are my eyes playing tricks. Thanks for the help.

View attachment 332999

Looks like the spring preload is set stiffer on DS versus PS, that would do it. There is no adjustment other than spring preload that I know of?

 

[Amitchellr]

Looks like the spring preload is set stiffer on DS versus PS, that would do it. There is no adjustment other than spring preload that I know of?

Thank you. I will look into that.

 

[trigger]

Smitty's right, you have too much preload on the springs. Take the weight off and crank them down a bit.

 

[Amitchellr]

Smitty's right, you have too much preload on the springs. Take the weight off and crank them down a bit.

Thank you for the help

 

[Smitty335]

Thank you for the help

Do you run empty most of the time? If not, put simulated weight, bed a passengers, I used 80# bags of Quickcrete in the seats, in your S X S and adjust both sides equal front and rear.