P1000m5 Remi’s Stroker 30 Build And Other Cool Bs!

[Remington]

Looking good there feller did you have to add some on the front section of the cage I had to add I think 1-3/4" to mine to get it
to line up with out forcing it to get the bolts back in I never done the rear it was taken off when new and never went back on I posted several pics when I done mine

Thanks
Yes, added 1-1/2” to the center front . Was just enough to get the right pitch.

 

[Admin]

 

[Remington]

Im painting her up now. Have to rotate the middle clamps and a few other adjustments to the roof to make and the upper windshield.

 

[Remington]

Looking good there feller did you have to add some on the front section of the cage I had to add I think 1-3/4" to mine to get it
to line up with out forcing it to get the bolts back in I never done the rear it was taken off when new and never went back on I posted several pics when I done mine

Heres that spacer

 

[Remington]

Got 3 coats of paint and a coat of hardened clear coat lacquer

 

[edans1]

Got 3 coats of paint and a coat of hardened clear coat lacquerView attachment 259944

Mines about to get cut down next week. Do you have any close up pics of the grab rail on passenger side. I think going down 4" on mine but looks like might be into that grab rail section. Curious how yours came out.

 

[Remington]

Mines about to get cut down next week. Do you have any close up pics of the grab rail on passenger side. I think going down 4" on mine but looks like might be into that grab rail section. Curious how yours came out.

This is about as close as i get u a pic at the moment. The SATV flip lower half windshield will fit. I cut 4-1/2” off the cage all the way around. Id cut the dam handle off but my tiny little wife like to have it so it stays.

 

[edans1]

This is about as close as i get u a pic at the moment. The SATV flip lower half windshield will fit. I cut 4-1/2” off the cage all the way around. Id cut the dam handle off but my tiny little wife like to have it so it stays. View attachment 260046

Came out great man, nice work.

 

[Remington]

Came out great man, nice work.

Thanks man!

 

[Remington]

Up at the cabin this weekend and got a chance to get the P1 out after the cage chop. We cut and split and stacked 5 cords of wood. Best time to do that up here when the snow is mostly gone, no foliage and cooler temps. Machine hauled all the wood we cut and the cage chop was nice to drive with. Just need to put the top on and the rest if the windshield and should be good.

 

[LarryAmboy]

Up at the cabin this weekend and got a chance to get the P1 out after the cage chop. We cut and split and stacked 5 cords of wood. Best time to do that up here when the snow is mostly gone, no foliage and cooler temps. Machine hauled all the wood we cut and the cage chop was nice to drive with. Just need to put the top on and the rest if the windshield and should be good.

View attachment 260476 View attachment 260477

Gotta be careful you don’t freeze the nipples


Sent from my iPad using Tapatalk

 

[Remington]

We got all the wood stacked in the lean too and all the scraps burned. The pioneer was great hauling the large logs. Good times with some buddys, fireball and beer!

 

[Remington]

Got back home this evening and decided, what the hell... im gona put my hard top on.
had to make a few adjustments that @joeymt33 told me i would have to make to the middle bracket and the rear in order to fit cuz my chop is exactly the same as his. Basically extending the rear bracket and removing the middle bracket and moving it about 1/2 further back and having to drill a few holes for it to fit. The end result was BA! Fits great and its ready to rock! Now for some other quirks not related to the chop top to get done.

 

[joeymt33]

Got back home this evening and decided, what the hell... im gona put my hard top on.
had to make a few adjustments that @joeymt33 told me i would have to make to the middle bracket and the rear in order to fit cuz my chop is exactly the same as his. Basically extending the rear bracket and removing the middle bracket and moving it about 1/2 further back and having to drill a few holes for it to fit. The end result was BA! Fits great and its ready to rock! Now for some other quirks not related to the chop top to get done.

View attachment 260687 View attachment 260688

That looks so much better.

How’s the handling? Can you notice a lower CG?

 

[Remington]

That looks so much better.

How’s the handling? Can you notice a lower CG?

Yes it does look chit tons better!

The handling is a lot better, not so topsy terby feeling and more rigid. Now i just need to add some bars from the brush guard to the A pillar. 😎

 

[Adam490]

Got back home this evening and decided, what the hell... im gona put my hard top on.
had to make a few adjustments that @joeymt33 told me i would have to make to the middle bracket and the rear in order to fit cuz my chop is exactly the same as his. Basically extending the rear bracket and removing the middle bracket and moving it about 1/2 further back and having to drill a few holes for it to fit. The end result was BA! Fits great and its ready to rock! Now for some other quirks not related to the chop top to get done.

View attachment 260687 View attachment 260688

Looks great! I need to do mine

 

[CGD]

That looks much better ! Now I'm just waiting to see how you cut your windshield so I can do some cage mods on mine this Summer.

 

[Remington]

That looks much better ! Now I'm just waiting to see how you cut your windshield so I can do some cage mods on mine this Summer.

Gona be doing that soon! Not looking forward to it cuz its a one time cut😬

 

[Remington]

So some spring cleaning lol.
had an Auxbeam 12” LED bar that finally after 4 years of muck started taking water. So i had a credit with lifetime LED and got this 12” bar. Had to re locate it to the top cuz the brackets would not allow me to put it low like the other one. So far the bugger is bright. Will see how it holds up in the muck

 

[Remington]

Another spring cleaning project ive been working on is my dual battery situation. My Odyssey 2nd batt expanded but did not explode. So i needed a way to rectify this situation. Answer, a small float charger/tender to mount under the hood to take care of both batteries while on dry doc. Then I still needed something to stop the battery from being damaged if i leave an accessory on for a period of time when drinking 😁 or just Rockin out 🤟. I got with my good friend @joeymt33 and he gave me an idea that he uses. A Blue Sea m-LVD low voltage disconnect. You set it up in series with your secondary battery and whatever accessory's you have hooked up to my case a large braker and the voltage not to drop below as in my case i set it for 11.1vdc and it will shut the system down so u dont drop to the dreaded 10vdc or below witch is starting certain death to a battery.

Pics are of the charger.

 

[Remington]

Now the Blue Seas was fun! Lol
Kinda F’d up Wiring diag so the override switch took a bit to finger out! Haha. Heres the set up...