P1000 Todd's 2018 Build

ToddACimer

ToddACimer

Pioneer 1005-2
Lifetime Member
Oct 7, 2016
3,685
15,587
113
Oshkosh, Wi
Ownership

  1. 1000-5
It begins again. Picked up a 2018 Pioneer 1000-5.

Here's a few photos at the dealer. I have a couple parts at home to install and the build should go fairly quick. In the end I'll have a pretty capable family trail machine.

IMG 20190521 163301
IMG 20190521 160315


Current list of parts to install:
FOX SHOCKS
28" Quadboss QBT846 on Raceline Rynos
Rear tire carrier
Fuel can rotopax 3.5 gal
Superwinch terra45
Factory utv a-arm guards
Full skid plates
Muffler tip
Rear bumper
Rear door storage
Reverse lights
Switch panel and Eaton fuse box
12" Rough Country front light bar in the stock front bumper
Front recovery points
Fan override switch
BCF harness bar when they become available
Can-am retractable harnesses
Fire extinguisher
Alien shade roof or Honda roof, I have both
RB3 bushings for all the doors
Stainless brake lines from Jaks
 
ohanacreek

ohanacreek

My EcoBoost has I4WD
Moderator
Lifetime Member
Jul 25, 2013
11,346
32,050
113
Shelby County, Alabama
Ownership

  1. 1000-5
It begins again. Picked up a 2018 Pioneer 1000-5.

Here's a few photos at the dealer. I have a couple parts at home to install and the build should go fairly quick. In the end I'll have a pretty capable family trail machine.

View attachment 130469 View attachment 130470

Current list of parts to install:
FOX SHOCKS
28" Quadboss QBT846 on Raceline Rynos
Rear tire carrier
Fuel can rotopax 3.5 gal
Superwinch terra45
Factory utv a-arm guards
Full skid plates
Muffler tip
Rear bumper
Rear door storage
Reverse lights
Switch panel and Eaton fuse box
12" Rough Country front light bar in the stock front bumper
Front recovery points
Fan override switch
BCF harness bar when they become available
Can-am retractable harnesses
Fire extinguisher
Alien shade roof or Honda roof, I have both
RB3 bushings for all the doors
Stainless brake lines from Jaks


Couple of parts....
 
ToddACimer

ToddACimer

Pioneer 1005-2
Lifetime Member
Oct 7, 2016
3,685
15,587
113
Oshkosh, Wi
Ownership

  1. 1000-5
Off to a slow start. Only drilled 20 holes in her on the first night.

IMG 20190521 214900


Cup holders added to the doors and under dash storage installed. Also installed the HillBilly park park brake. Hard to beat the auto unlock feature

IMG 20190521 214840


Found a good spot for front recovery points

IMG 20190521 192309


Painted them red

IMG 20190521 215124
 
Last edited:
Smitty335

Smitty335

Well-Known Member
Lifetime Member
Supporting Member
Oct 3, 2016
35,445
208,730
113
NWA Arkansas
Ownership

  1. 1000-3

  2. 1000-5
ToddACimer

ToddACimer

Pioneer 1005-2
Lifetime Member
Oct 7, 2016
3,685
15,587
113
Oshkosh, Wi
Ownership

  1. 1000-5
So what are you doing different this round?

Can-am 4 point belts. Starting with the crossmembers reinforced. Warn winch mount instead of the KFI. Stock front bumper. 8" RC reverse lights. B-Pillar flood lights like yours, 3.5" cubes (old reverse lights on my machine)

That's the only planned changes
 
advertisement
advertisement

Similar threads

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!