P1000 Turnkey Heavy Duty Tie rod kit

[Superthrill]

Tie Rods : Honda Pioneer 1000 HD Tie Rod Kit

Anyone run these? All my crawlers have had this type set up. Since tie rods are pretty cheap, just not sure.

 

[Admin]

 

[sharp]

Tie Rods : Honda Pioneer 1000 HD Tie Rod Kit

Anyone run these? All my crawlers have had this type set up. Since tie rods are pretty cheap, just not sure.

If they are stronger that the factory ones they might transfer energy by not bending in and tear up something more expensive to replace.

 

[GlockMeister]

Just like @sharp said....tie rods are alot cheaper than a steering rack!

 

[Tigermark]

Just like @sharp said....tie rods are alot cheaper than a steering rack!

And tie rods are a heck of a lot easier to replace out on the trail!

 

[Superthrill]

That's what I was thinking. At$20 a piece, you can do a lot of tie rods for that price.

Just a little hard coming from the other side where we designed to hopefully never break on the trail to strategic weak links in the side by side. Just not a lot of aftermarket steeringboxes for the P1000.

I do kinda miss being able to run engine driven accessories such as hydraulic pumps for steering and brakes and converted AC units for on board air.

 

[Hondasxs]

How many reports have there been of busted steering assemblies for the 1000's?

Not that I'm not also concerned about that. I bent a tie rid and it bent so easy I could not be leave it happened.

I kinda feel like the curved design of the tie rode end and how its shaped is made to bend. They always bend right at the threads.

Anyways. If it wasn't $300. I'd pick up a set.


Sent from my SM-G955U using Tapatalk

 

[Superthrill]

I have the equipment to make those, mill, lathe etc. Just wondering how the rest of the system holds up. I beleive i will stick with stock setup at $20 a peice.

Being new to side by sides, just always looking for bullet proof setups.
I wonder about axles and diffs as well. Has anyone took out a diff on the P1000 after upgrading axles? Might just have to get used to "fusible links"

Question? Can the tie rods be replaced without removing the actual tie rod end from the knuckle? Unscrew the inner and then unscrew the rod from the end, with the end still attached to the arm?

 

[Hondasxs]

IQuestion? Can the tie rods be replaced without removing the actual tie rod end from the knuckle? Unscrew the inner and then unscrew the rod from the end, with the end still attached to the arm?

The bend itself prevents you from being able to do this normally.

Sent from my SM-G955U using Tapatalk

 

[Superthrill]

The bend itself prevents you from being able to do this normally.

Sent from my SM-G955U using Tapatalk

So you have to remove the tie rod end. One more thing to add to the toolbox.

 

[JTW]

So you have to remove the tie rod end. One more thing to add to the toolbox.

Crows foot makes it easier.. and for this price you’re crazy not to get one.
https://www.amazon.com/Sunex-97740-2-Inch-4-Inch-Crowfoot/dp/B000I1R28E/?tag=sxsweb24-20



As for your question.. regarding the upgraded axles and breaking a diff... I think I’m about the only one to have tested the next weak link in that combo. If it’s just one tire getting sudden traction you’ll still bust the axle.. if both catch you’ll shear the propeller shaft.
Pictures thread - MOAB, Utah.

 

[Superthrill]

Crows foot makes it easier.. and for this price you’re crazy not to get one.
https://www.amazon.com/Sunex-97740-2-Inch-4-Inch-Crowfoot/dp/B000I1R28E/?tag=sxsweb24-20



As for your question.. regarding the upgraded axles and breaking a diff... I think I’m about the only one to have tested the next weak link in that combo. If it’s just one tire getting sudden traction you’ll still bust the axle.. if both catch you’ll shear the propeller shaft.
Pictures thread - MOAB, Utah.

Awesome Moab pics! We used to make a yearly pilgrimage to Moab. Gas prices stopped that for a while. That place gets in your blood and is something you can never get over!

It is so otherworldly compared to the East Coast.

Hell's Revenge may not be the toughest trail, but it is the best on earth in my opinion. Scenery is phenomenal.. Pritchett Canyon, Poison spider Mesa,Coyote Canyon, Upper Heldorado and Area BFE are awrsome.

 

[JTW]

Awesome Moab pics! We used to make a yearly pilgrimage to Moab. Gas prices stopped that for a while. That place gets in your blood and is something you can never get over!

It is so otherworldly compared to the East Coast.

Hell's Revenge may not be the toughest trail, but it is the best on earth in my opinion. Scenery is phenomenal.. Pritchett Canyon, Poison spider Mesa,Coyote Canyon, Upper Heldorado and Area BFE are awrsome.

Agreed!