UH OH, 14 WHEELS OK ON X

[Jason W]

I just realized, I wanted to keep my tusk beadlocks frontier p1-3 , to use on the Talon, was going to swap with them on trade. 5+2 offset, are they going g to clear ?????

 

[Admin]

 

[Hondasxs]

IDK...
It depends on the wheel build.
Some 14's fit, others dont.
14 is the outside wheel size, not the inside size.
Inside clearance size can very.

 

[CID]

fwiw: stock Talon wheel offsets are 6+1 front, 4+3 rear. Changing to something different on the front will affect scrub radius ... I have no idea how that will affect steering effort.

 

[Adam490]

There's a nub on the outer edge of the Talon uppers that will hit some wheels. You'll also be really close to the calipers with a 14" wheel. They'll probably work for cruising the neighborhood or a leisure ride but I wouldn't beat and bang on them.

 

[Remington]

Get 15’s and not let your hart be troubled!

 

[Jason W]

So keep me in line, new wheels, to be able to rotate would be all 4 , 6-1bavk space with spacers in rear??
Help please

 

[GovtMule]

I did 5/2 15’s with a 1” spacer in the back from my Pioneer.

 

[Brett002]

The reason for the 15" stock wheel is caliper clearance. These talons have some large rotors. If you run a 14" wheel you run a chance of getting a rock stuck between the wheel and the caliper. Bam! there goes your sweet 14" wheel no matter what the backspacing. Hope this helps and good luck!

 

[Brett002]

15:00 mark. 14" wheels fit but not ideal.

 

[Jason W]

I did 5/2 15’s with a 1” spacer in the back from my Pioneer.

Thanks brother

 

[CID]

So keep me in line, new wheels, to be able to rotate would be all 4 , 6-1 back space with spacers in rear??
Help please

Yes, 1-1/2" spacers in the rear will square you up with 6+1 on all 4 corners on a Talon.

 

[Jason W]

Terabytes went on just fine

 

[Tramguage1]

I tried my 14's off the crew on the front of my Talon and they did not clear!!!! Also looking to go to a 6-1 offset instead of the 5-2's i have now.