P500 Under Hood Storage Box

[100Acre]

I had wanted to get the Black Sterlite box from Wally but everytime I went there, they were sold out. So, I went to Lowes and bought the Hefty one. It fits nicely but I need to divert the radiator overflow line because it looks like the box pinches it some. Any suggestions?

 

[Admin]

 

[trigger]

Is that going to stay in place when you do donuts?

 

[banjobart]

Unclip the rubber hose clamp and rout the hose under the steel crossbar. Takes only a minute or two.

If you buy the EMP stainless steel storage box you will be very, very happy. It holds a lot of survival/extraction gear including a 1 or 2 ton comealong with extra cable, folding saw, fox hole shovel, as well as as a tow strap and rope.

 

[100Acre]

Is that going to stay in place when you do donuts?

It'll just be more shrapnel to add to the mix when I fly off a cliff......We can fly!

 

[100Acre]

Unclip the rubber hose clamp and rout the hose under the steel crossbar. Takes only a minute or two.

If you buy the EMP stainless steel storage box you will be very, very happy. It holds a lot of survival/extraction gear including a 1 or 2 ton comealong with extra cable, folding saw, fox hole shovel, as well as as a tow strap and rope.

Where does someone find one?

 

[banjobart]

Extreme Metal Products - ATV Parts & UTV Accessories

$79, money well spent.

You can get EMP stuff with free shipping if you order from www.rockymountainatv.com or www.summitracing.com or others, do a google search.

 

[Mudder]

Or heat gun to plastic edge a bit. Did that with 3 gal. Trash can under drivers seat. Just added power steering which took up some space under hood.

 

[GaryG]

Unclip the rubber hose clamp and rout the hose under the steel crossbar. Takes only a minute or two.

If you buy the EMP stainless steel storage box you will be very, very happy. It holds a lot of survival/extraction gear including a 1 or 2 ton comealong with extra cable, folding saw, fox hole shovel, as well as as a tow strap and rope.

I just unscrewed the cap off the over flow cap and ran it under the bar. no tools needed

also i drilled two holes in the top drivers side of the container and ran a big sip tie through it and around the farme near the steering wheel.

 

[Sbrown]

Or heat gun to plastic edge a bit. Did that with 3 gal. Trash can under drivers seat. Just added power steering which took up some space under hood.

I want power steering so bad but cant afford it right now.