BOX1

P500 UTV Gun Mount for Honda Pioneer 500

HaggyGP

HaggyGP

Active Member
Jun 27, 2019
37
159
33
Grande Prairie Alberta Canada
Ownership

  1. 500
My dad and I managed to install my Amazon delivery been waiting for... Kolpin UTV Gun Mount [HASHTAG]#20073[/HASHTAG]

The Gun mount is about 15% to large... so... made one slight modification. Thanks to Tony at Star Fabricating, he was able to bend one side of the floor bracket in the big steel brake to match up with the hump in the floor, allowing us to offset the mount. We need to access the Parking brake, and have enough room for big hunting boots. It was a success. In fact we think it will be much stronger, less wobbly being bolted at two different points on the floor, giving us strength from all angles. I am 6'3" and 250 lbs, and have lots of elbow & leg room with both dad and I sitting.
IMG 20190830 135503
IMG 20190830 123636
IMG 20190830 123734
IMG 20190830 135122
IMG 20190830 135105
 
1border4manu

1border4manu

Well-Known Member
Supporting Member
Jul 4, 2019
2,133
14,385
113
Zephyrhills, Florida
Ownership

  1. 500
20190808 195347 2 20190808 195405 20190818 094404 I decided I wanted something outside the cab. It is made by Strongmade. But i think that should workout well for you. Thanks for sharing.
 
  • Like
Reactions: HaggyGP and Eltobgi
HaggyGP

HaggyGP

Active Member
Jun 27, 2019
37
159
33
Grande Prairie Alberta Canada
Ownership

  1. 500
  • Like
Reactions: 1border4manu
1border4manu

1border4manu

Well-Known Member
Supporting Member
Jul 4, 2019
2,133
14,385
113
Zephyrhills, Florida
Ownership

  1. 500
Hey nice job, I like what you have installed. I was only worried about keeping the guns out of the elements. If I find the tree to awkward, I may do what you have done. Looks great on your machine!
Thnak you, I use it mainly at the sporting clay course. It is made by Strongmade.
 
K

KyleBeyea

New Member
Dec 28, 2017
3
0
1
Nebraska
Ownership

  1. Do not currently own
Gun Grabber makes a nice rack. You can also get parts to build your own if theirs doesn’t work for you.
 
W

Woody8692

New Member
Aug 20, 2019
3
16
3
Ontario
Ownership

  1. 500
My dad and I managed to install my Amazon delivery been waiting for... Kolpin UTV Gun Mount [HASHTAG]#20073[/HASHTAG]

The Gun mount is about 15% to large... so... made one slight modification. Thanks to Tony at Star Fabricating, he was able to bend one side of the floor bracket in the big steel brake to match up with the hump in the floor, allowing us to offset the mount. We need to access the Parking brake, and have enough room for big hunting boots. It was a success. In fact we think it will be much stronger, less wobbly being bolted at two different points on the floor, giving us strength from all angles. I am 6'3" and 250 lbs, and have lots of elbow & leg room with both dad and I sitting. View attachment 151986 View attachment 151987 View attachment 151988 View attachment 151989 View attachment 151990
Going to install this setup in my pioneer 520 and was just wondering if you used bolts and nuts to mount in the 4 holes or did you use self tappers. Also was it difficult to get at the nuts from underneath the machine. Thanks
 
  • Like
Reactions: Remington
Remington

Remington

Sheriff Chief POIDH Enforcement Officer
Lifetime Member
Supporting Member
Jul 24, 2016
18,161
103,460
113
Michigan
Ownership

  1. 1000-5

  2. Talon X
Going to install this setup in my pioneer 520 and was just wondering if you used bolts and nuts to mount in the 4 holes or did you use self tappers. Also was it difficult to get at the nuts from underneath the machine. Thanks
Would be nice to know wouldn't it?
Sad thing if u look at his profile and the thread date, the thread is from 2019 and he was last on the forum 2-1/2 years ago.
Might want to send him a PM and he might get an email and respond back to you.
Most likely looks like yoyr gonna have to experiment with the mounting yourself tho
 
  • Like
Reactions: Woody8692
BOX2
box3

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!