P500 2018 Pioneer 500 Build

[BThompson]

Just bought a 2018 Pioneer 500 with 125 miles on it. Had the roof, cargo tray and power steering already

 

[Admin]

 

[BThompson]

Added tires and removed the cargo tray

 

[BThompson]

Added the Strongmade bumper and a Badlands 3500lb winch. It's designed to have the winch mounted on top but I removed the Strongmade logo and cut out a hole so I could mount the winch in the inside.

 

[1border4manu]

I like how you used the Strongmade for you winch. Have not sen that sone yet. Thanks for sharing.

 

[Mudder]

Welcome from Ga and Congrats on the P500. Its good it came with PS, one of the best mods. I also like your winch mount idea on the stromgmade bumper.

 

[HiFive]

Congratulation, have same mods but, no p.s. didn't think I like the tray much but use it to hold storage box. Tray is a very good mod too.

 

[BThompson]

I like how you used the Strongmade for you winch. Have not sen that sone yet. Thanks for sharing.

I stole the idea from my step dad haha. He did it way before me

 

[rustyneversleeps]

I stole the idea from my step dad haha. He did it way before me

Do you have any pics of the hole you cut for the fairlead? I'm curious how you mounted the winch on the inside. Looks real clean man I like it!

 

[Montecresto]

Added the Strongmade bumper and a Badlands 3500lb winch. It's designed to have the winch mounted on top but I removed the Strongmade logo and cut out a hole so I could mount the winch in the inside.


View attachment 276534

That certainly looks good, can you still get to it to clean mud and debri that will cake up in there? What about access to the free spool knob?

 

[J80]

Congrats on a nice ride and Welcome from WNC


#NTC

 

[BThompson]

That certainly looks good, can you still get to it to clean mud and debri that will cake up in there? What about access to the free spool knob?

Yeah its very accessible

 

[nctrailboss]

Nice snag! Got it lookin' good and functional.

 

[crewcabrob]

Looks like you have a fun little project!

Rob

 

[BThompson]

I went out this weekend and realized I need to figure out some dust control. It comes up from the floor pretty bad. Any ideas would be appreciated

 

[rustyneversleeps]

I went out this weekend and realized I need to figure out some dust control. It comes up from the floor pretty bad. Any ideas would be appreciated

Trigger Shield my man.... P500 - Update: Trigger Shield

 

[BThompson]

Is there a thread showing what it looks like?

 

[Tom_C]

Is there a thread showing what it looks like?

Look through that thread above, there's pics in there.

 

[trigger]

Is there a thread showing what it looks like?

P500 - For Sale: Rubber Noise/Heat Shield

As anyone who owns a P5 knows, the noise that comes from behind you is loud. Especially with a roof and windshield on, it just reverberates off of them. Another issue is with the heat that comes up between the seats and the seat belt latch area, just ride through a puddle with a hot engine and...

hondasxs.com

 

[BThompson]

Do you have any pics of the hole you cut for the fairlead? I'm curious how you mounted the winch on the inside. Looks real clean man I like it!

I dont have a pic but it was pretty easy. I just measured to find the middle then marked where I needed to drill holes to bolt it on. Then cut a rectangle bug enough to match the fairlead.

 

[BThompson]

Out grouse hunting