P1000 27.5 x 11 x 14 Pitbull Growlers on all 4 corners stock?

[White-1000-5]

I have a all stock 2016 PK5. I ride a lot of pavement and my front tires r shot at 1300 miles. I Have been running the same size tires all around for years on my atvs and would like to get a set of aftermarket wheels and was wondering if I could run 8ply 27.5x11x14 Pitbull Growlers on all 4 corners without any modifications? I will probably add 1 inch wheel spacers to the back to even it up to the front afterwards. I have had 2 sets of Pitbull Growlers on my atvs and has been hands down favorite tires Ive ever owned. THANKS

 

[Cuoutdoors]

I love those tires too! Back will be fine. Front might be tight. @Kilo427 might be able to help. He runs those tires.

Sent from my SM-G960U using Tapatalk

 

[Plumber32]

I have a all stock 2016 PK5. I ride a lot of pavement and my front tires r shot at 1300 miles. I Have been running the same size tires all around for years on my atvs and would like to get a set of aftermarket wheels and was wondering if I could run 8ply 27.5x11x14 Pitbull Growlers on all 4 corners without any modifications? I will probably add 1 inch wheel spacers to the back to even it up to the front afterwards. I have had 2 sets of Pitbull Growlers on my atvs and has been hands down favorite tires Ive ever owned. THANKS

You'll need spacers, and they are not a good pavement tire.

 

[Kilo427]

They will wear on pavement but I have been very impressed with them so much I have 8 of them. I think that with spacers they should fit but I’m not 100 percent as I never ran stock.

 

[White-1000-5]

Well I was really hoping I could ran that setup without any modifications. So what kind of spacers would i need? What kind of same size on all 4 corners setup size wise could I run stock and it still look cool and functional? I know the growlers won't wear well on pavement but they r super smooth while on it and grip like crazy when not.

 

[Cuoutdoors]

Well I was really hoping I could ran that setup without any modifications. So what kind of spacers would i need? What kind of same size on all 4 corners setup size wise could I run stock and it still look cool and functional? I know the growlers won't wear well on pavement but they r super smooth while on it and grip like crazy when not.

235/75-15 all the way around. All stock suspension with 1" spacer on rear puts the tires all in line.

Sent from my SM-G960U using Tapatalk

 

[White-1000-5]

What spacers would i need for the front to run the 27.5x11x14 growlers? I couldn't get a wheel offset enough for them to fit?