P1000 30-10-14 carnivores

[BigOL3]

I just finished installing front super atv arms in prperation for 30x14 tires. Was thinking about carnivores too. Running factory wheels with 1" spacers front and 1.5 on rear.

To run 30's with no to very minimum issues you must run front offset arms. Lift is not required but is a nice addition.

With out the arms. You will eat up your front inner wheel wells.

The rears have very light issues on a hard jumps compression but overall will fit.



Sent from my HTC6545LVW using Tapatalk

I thought with factory wheels the front and rear was the same width. If correct, why does the rear spacers need to be .5" wider???

 

[Admin]

 

[BWAF]

I thought with factory wheels the front and rear was the same width. If correct, why does the rear spacers need to be .5" wider???

If he put front wheels on back

Sent from my SM-G930U using Tapatalk

 

[BigOL3]

I thought with factory wheels the front and rear was the same width. If correct, why does the rear spacers need to be .5" wider???

Disregard ..... I see you changed A arms.

 

[Hondasxs]

Im running 235-75r -15 lt on 5x2 sti no lift 1" rear spacer some say they will rub but so far no problems .It's close some I'll put arms on View attachment 78104View attachment 78105View attachment 78106View attachment 78107

Sent from my SM-G930U using Tapatalk

Nice.. translates to a 30x9.5
But how you not rubbing with that skid plate?
You trim it up?
I have 28 roctanes and i cant fit my hand between the tire and wheel well at full compression.

Sent from my HTC6545LVW using Tapatalk

 

[bboatright05]

Im running 235-75r -15 lt on 5x2 sti no lift 1" rear spacer some say they will rub but so far no problems .It's close some I'll put arms on View attachment 78104View attachment 78105View attachment 78106View attachment 78107

Sent from my SM-G930U using Tapatalk

So no modifications at all on the front?

Im running 235-75r -15 lt on 5x2 sti no lift 1" rear spacer some say they will rub but so far no problems .It's close some I'll put arms on View attachment 78104View attachment 78105View attachment 78106View attachment 78107

Sent from my SM-G930U using Tapatalk

at

 

[BWAF]

Nice.. translates to a 30x9.5
But how you not rubbing with that skid plate?
You trim it up?
I have 28 roctanes and i cant fit my hand between the tire and wheel well at full compression.

Sent from my HTC6545LVW using Tapatalk

Mine are 28.5 x 9 and it's close had to trim trail armor skid plate and put one screw in finder flare to pull it back .math says 28.8 x 9.25 but there not

Sent from my SM-G930U using Tapatalk

 

[BWAF]

So no modifications at all on the front?

at

One screw in finder flare to hold back

Sent from my SM-G930U using Tapatalk

 

[Hondasxs]

I thought with factory wheels the front and rear was the same width. If correct, why does the rear spacers need to be .5" wider???

No. There not.
Id have to look it up again. But fronts are like 6.5" and rears 7.5 with weird offsets.

Sent from my HTC6545LVW using Tapatalk

 

[bboatright05]

One screw in finder flare to hold backView attachment 78110

Sent from my SM-G930U using Tapatalk

What do the tires measure exactly?

 

[BWAF]

What do the tires measure exactly?

Off laying on ground 28.5 on with 9psi on buggy 27.75 x9.25 in the front love the truck tires so far

Sent from my SM-G930U using Tapatalk

 

[Hondasxs]

I thought with factory wheels the front and rear was the same width. If correct, why does the rear spacers need to be .5" wider???

Forgot the second part of your question.
Because you are going from a 9" tire on the front to a 10 and a 11" on rear to a 10".
It makes the rears look like they sit in more than the fronts do.

 

[Hondasxs]

I want a straight up answer. Will 30-10-14 maxxis carnivores on a 14x7 5+2 wheel work on my 1000-5 deluxe with ONLY the highlifter 2.5 and be functional? And has anyone done this exact setup?

Here is about as close to a exact example as your going to get. Still think its a NO on 30's.

29x9.5x15. Lift kit. Itp Hurcansl wheels. Not sure of offset. No spacers.

I think this will rub at full compression and hard turns. I cant fit hand between the tire and wheel well.



Sent from my HTC6545LVW using Tapatalk

 

[bboatright05]

Here is about as close to a exact example as your going to get. Still think its a NO on 30's.

29x9.5x15. Lift kit. Itp Hurcansl wheels. Not sure of offset. No spacers.

I think this will rub at full compression and hard turns. I cant fit hand between the tire and wheel well.

View attachment 78141View attachment 78142View attachment 78143View attachment 78144View attachment 78145View attachment 78146View attachment 78147

Sent from my HTC6545LVW using Tapatalk

Is there much behind the plastic in the wheel wells on our machines? Cutting or modifying help at all?

 

[BWAF]

Here's a few more of 235's Here's under side no rub at full compressen but if it's muddy out it will suck rocks threw

Sent from my SM-G930U using Tapatalk

 

[SimpleMan80]

I just finished installing front super atv arms in prperation for 30x14 tires. Was thinking about carnivores too. Running factory wheels with 1" spacers front and 1.5 on rear.

To run 30's with no to very minimum issues you must run front offset arms. Lift is not required but is a nice addition.

With out the arms. You will eat up your front inner wheel wells.

The rears have very light issues on a hard jumps compression but overall will fit.



Sent from my HTC6545LVW using Tapatalk

Do you think I would have any issues putting a true 30 inch tire on a p1 with satv a arms and 5+2 offset wheel ?

 

[BWAF]

Do you think I would have any issues putting a true 30 inch tire on a p1 with satv a arms and 5+2 offset wheel ?

@ snuffwhiskey I think a few guys are but don't quote me

Sent from my SM-G930U using Tapatalk

 

[Plumber32]

Do you think I would have any issues putting a true 30 inch tire on a p1 with satv a arms and 5+2 offset wheel ?

No problem there. But you'll want rear spacers. I believe I went 1.5" spacers to even it out

 

[BWAF]

No problem there. But you'll want rear spacers. I believe I went 1.5" spacers to even it out

Did remember you had 30"s didn't want to steer him wrong

Sent from my SM-G930U using Tapatalk

 

[Plumber32]

Did remember you had 30"s didn't want to steer him wrong

Sent from my SM-G930U using Tapatalk

Yep 30s on 5+2 beadlocks. Super atv a arms, 2.5" hilifter lift