P500 EMP windshield for Pioneer 500

[bowhunterbill]

I’m looking at automotive safety glass windshields for my ‘17 Pioneer 500. I found the Enhanced Metal Products windshield, it looks good (metal frame, powder coated, vents, includes a manual windshield wiper), Their web site is useless- no reviews and when I search their dealer locator of the 3 I found, 2 don’t stock and sell them and the 3d had the email returned.

Cost is around $445.

Anybody have one and any feedback?


Sent from my iPhone using Tapatalk

 

[Admin]

 

[Smitty335]

I’m looking at automotive safety glass windshields for my ‘17 Pioneer 500. I found the Enhanced Metal Products windshield, it looks good (metal frame, powder coated, vents, includes a manual windshield wiper), Their web site is useless- no reviews and when I search their dealer locator of the 3 I found, 2 don’t stock and sell them and the 3d had the email returned.

Cost is around $445.

Anybody have one and any feedback?


Sent from my iPhone using Tapatalk

I don't have that brand. I have the full and a shortie. I don't like a full windshield when it's nice outside and not raining or hailing. If you go full windshield, get at least a rear soft panel for the cab for dust control.

 

[Bigtee]

UTV 801 makes an excellent glass windshield for the P500/P520

 

[trigger]

UTV 801 makes an excellent glass windshield for the P500/P520

View attachment 262138

Just curious, what's going on with the backside of that windshield? Looks like the bottom section is hinged but it's not just hanging there is it?

 

[Bigtee]

It has brackets that hold it closed or open.

 

[Bigtee]

It flips up for easy under hood access also.

 

[CamoP500]

Highly recommend UTV 801's windsheild. Have it on mine and it is high quality. Lower vent works great. Like everything about it. Best of all its glass not plastic -which even when hardcoated will eventually scratch. spoke with him directly and he gave me full money back guarantee including shipping.

 

[Hib]

I’m looking at automotive safety glass windshields for my ‘17 Pioneer 500. I found the Enhanced Metal Products windshield, it looks good (metal frame, powder coated, vents, includes a manual windshield wiper), Their web site is useless- no reviews and when I search their dealer locator of the 3 I found, 2 don’t stock and sell them and the 3d had the email returned.

Cost is around $445.

Anybody have one and any feedback?


Sent from my iPhone using Tapatalk

I called EMP directly and ordered mine. Took about 10 days to receive. I've just mounted it and have not rode it since so can't give much of a review other than it goes on without to much of a hassle with two people. It's hinged at the top for access under hood.

 

[bowhunterbill]

Thanks for comments and pictures. The UTV 801 is $569 plus $60 for a manual wiper. EMP is $445 including a manual wiper.

Is the UTV 801 worth the additional $184?


Sent from my iPhone using Tapatalk

 

[CamoP500]

If you contact UTV 801 (hes on this site ) you may find the cost to be very competitive. I can't comment on the quality of the EMP as I've never seen one. But the UTB 801 is a high quality accessory.

 

[bowhunterbill]

I can’t figure out the messaging/ I can’t find him.


Sent from my iPhone using Tapatalk

 

[CamoP500]

he goes by "golden" on here. His name is Fred, and his company is SxSwindshield (same as UTV 801 I think his son owns one him the other or something like that). his number is 801-380-1255. Best to just call him leave message if he doesn't answer. He will call you back.

 

[bowhunterbill]

Thanks, I appreciate the help.


Sent from my iPhone using Tapatalk

 

[GrnP500]

Thanks, I appreciate the help.


Sent from my iPhone using Tapatalk

Fred may give you a discount too (hondasxs club) . Fred Mower.

 

[CamoP500]

He was very generous when I purchased directly from him.

 

[Corycarlo]

EMP for the win! Love mine

 

[CamoP500]

Nothing wrong with the EMP. My dad has it on his. I have the SXS windshield on mine and would give it the nod because it has the large flip up lower vent which allows a lot more air in and it is easier to access under hood. The EMP requires you to disconnect the two rubber straps- which is no big deal-then the entire windshield hinges up at the top. But you need to wedge it open with a block of wood or something to keep it open while you remove the hood. That and the glass area is a bigger on the SxS. Really both are good products.

 

[bowhunterbill]

Where does the UTV 801 or EMP (sorry for the EMT in title) mount on the roll cage bar? I put a basket meant for the front hood up high. It blocked my view of the trails at night.

I’m trying to figure if I need to remove it to put on those windshields. Not the end of world if I do.

Can somebody post pictures from inside so I can see?








Sent from my iPhone using Tapatalk

 

[Hib]

Where does the UTV 801 or EMP (sorry for the EMT in title) mount on the roll cage bar? I put a basket meant for the front hood up high. It blocked my view of the trails at night.

I’m trying to figure if I need to remove it to put on those windshields. Not the end of world if I do.

Can somebody post pictures from inside so I can see?

View attachment 263792

View attachment 263793

View attachment 263794

View attachment 263795
Sent from my iPhone using Tapatalk

emp mounts to side of cage, nothing on top.

 

[bowhunterbill]

So- EMP’s windshield has no brackets on the horizontal cage tube. Unless there’s some contact with my basket brackets, I should be ok.

Is the UTV 801 mounted the same way in the 2 vertical tubes?

Thanks for taking the time for pictures.


Sent from my iPhone using Tapatalk