Hey all....Has anybody had to change front calipers or rebuild them. One of mine is sticking on occasion. Just trying to find the best out. Honda wants like $300 a piece for theirs....
take it off pop the cylinder out clean it up put it back in if no scarring. i use a hydraulic shop around me to swap the seals out. i dont know if we have a rebuild kit for these or not.
Sent from my E6910 using Tapatalk
Sent from my E6910 using Tapatalk
H
My 2017 right front was sticking at 3453 miles/430 hrs.Got a full set of Niche for about $47 at Walmart.com.Put 1276 miles on them so far.Problem was slide pins were mostly dry. I removed small nicks with Scotch-brite,put some brake lube on pins and the rest is history
Well, caliper started sticking again. I removed it and tried to work it free with c clamp and air...seized up. Replaced with new one$$$$.....all is good now.
Haldog77
NTC's Mafia Enforcer (Ret.)
Lifetime Member
go on Ron ayers, partzilla, motorsport - etc. - search under the oem parts if you choose to go down that road - I think a set of seals is $10 and if you change both pins, maybe another $15, imo - id get it apart and see what you need - probably just a good cleaning and a new set of seals is all that is needed - ive not seen many bad pistons but anything is possible
Well, I went on Ron Ayers and order Seal kit. Putting new seal in both sides. Order extra I know how I am.
advertisement
