Govt Mule 2024 Talon 1000R Parts Addition Thread

JayPo

JayPo

Somewhat Well-Known Member
Lifetime Member
Aug 15, 2020
12,397
119,768
113
Tennessee
Ownership

  1. Other Brand

  2. Talon R
Done. I put a piece of rubber in between the bracket and the windshield just to reduce any chance of rattle between the two. It’s solid and stable. Shouldn’t shake under motion.

View attachment 437969
That looks good. I have those same lights that I might do the same.
 
GovtMule

GovtMule

NTC’s SoA, Chief Sarcasm Officer-Self Appointed
Lifetime Member
May 19, 2021
14,278
138,053
113
Tennessee
Ownership

  1. Talon R
I’m still wondering where the fishing tackle is going? Are you really sure you can’t run lights and sirens on your pov? 🤣🤣
One of those really sweet cam locking overhead “fishing rod” mounts would be pretty cool, but I’m trying to escape fishing when running this machine…not making it more fishing friendly!
IMG 7192
 
Adam490

Adam490

HFA Grand High Wizard
Lifetime Member
Supporting Member
Apr 7, 2019
7,841
58,440
113
Covington, LA
Ownership

  1. 1000-5

  2. Talon R LV
One of those really sweet cam locking overhead “fishing rod” mounts would be pretty cool, but I’m trying to escape fishing when running this machine…not making it more fishing friendly!
View attachment 438129
Is that a 300 or a 5.56? If it's a 5.56, how does that suppressor hold up to the short barrel length? I have a 7.5" SBR upper that I wanted to suppress but was always worried about nuking the baffles.
 
GovtMule

GovtMule

NTC’s SoA, Chief Sarcasm Officer-Self Appointed
Lifetime Member
May 19, 2021
14,278
138,053
113
Tennessee
Ownership

  1. Talon R
Is that a 300 or a 5.56? If it's a 5.56, how does that suppressor hold up to the short barrel length? I have a 7.5" SBR upper that I wanted to suppress but was always worried about nuking the baffles.
It’s just a stock photo I picked up from the mount site. I have no idea. I’ve got a 10.5” with a suppressor for work, but I rarely use it. Can’t give much insight other than when I have used it cleaning is a b****. Makes a mess. (Twss)
 
Scoop

Scoop

Well-Known Member
Lifetime Member
Supporting Member
Sep 7, 2021
4,855
19,164
113
Michigan
Ownership

  1. Other Brand

  2. 1000-5

  3. Talon R LV
Is that a 300 or a 5.56? If it's a 5.56, how does that suppressor hold up to the short barrel length? I have a 7.5" SBR upper that I wanted to suppress but was always worried about nuking the baffles.
I have a Dear Air Wolfman on an AR-9 pistol (9MM) from Brigade Mfg. It originally came with a 5.5" barrel, but I swapped it out for a 6" Angstadt Arms barrel because I needed just a little more room for the Dead Air muzzle brake for the suppressor.

I've put hundreds of 9MM rounds down range with that can and that short 6" barrel, and have never experienced any issues, including baffle strikes.

I really like the Wolfman. It can suppress 9mm, 5.56, 300BLK, 7.62×39, 350 Legend, and .357 Mag. I have muzzle brakes on the AR9, an AR15 SBR in 5.56, and even put a booster setup on the Glock 19. The nice thing about the Wolfman is that, if you're gonna run it on a handgun, the front third spins off and you move the front cap to the shorter version of the can (7.5" down to 5.13"). It's wipe compatible too.

That can on a 300AAC with subsonic ammo would be damn near as quiet as a church mouse.
 
GovtMule

GovtMule

NTC’s SoA, Chief Sarcasm Officer-Self Appointed
Lifetime Member
May 19, 2021
14,278
138,053
113
Tennessee
Ownership

  1. Talon R
Bosman finally shipped the bumper. Should be here early next week.

Finished the turnpro install last night around midnight. Went ahead and ran a wire to the back for rear lights while I had the console out again. Ran out of steam and started losing tools and stuff so I called it a night. Hopefully can get it buttoned up this evening. Tired of looking at parts scattered all over my garage!
 
GovtMule

GovtMule

NTC’s SoA, Chief Sarcasm Officer-Self Appointed
Lifetime Member
May 19, 2021
14,278
138,053
113
Tennessee
Ownership

  1. Talon R
Finally. TurnPro finished
IMG 8387
IMG 8391
IMG 8392

Auxbeam 6 Gang
IMG 8393


Underhood wiring complete along with custom made mud/splash guard for the tunnel area.

IMG 8388
IMG 8389

IMG 8395

Finally the @Hondasxs cube lights on custom brackets on the lower flip windshield brackets
IMG 8390
 
Mopower58

Mopower58

CST is the Best!
Lifetime Member
Supporting Member
Aug 10, 2017
74,715
676,781
113
Crystal Springs,Ms.
Ownership

  1. 1000-3
advertisement
Coeus

Coeus

Major General
Lifetime Member
Dec 9, 2019
62,555
620,240
113
Signal Mountain, TN
Ownership

  1. 1000-5

  2. Talon R4 LV
Mopower58

Mopower58

CST is the Best!
Lifetime Member
Supporting Member
Aug 10, 2017
74,715
676,781
113
Crystal Springs,Ms.
Ownership

  1. 1000-3
Buggyman

Buggyman

Well-Known Member
Lifetime Member
Supporting Member
Jan 3, 2020
38,667
324,431
113
ne. ohio
Ownership

  1. 700-2
GovtMule

GovtMule

NTC’s SoA, Chief Sarcasm Officer-Self Appointed
Lifetime Member
May 19, 2021
14,278
138,053
113
Tennessee
Ownership

  1. Talon R
Nice work looks good
I watch way too many car shows and am amazed by their customization skills. I can’t hold a candle to what they do, but I have the mind for it!!, just not the equipment or the ability. I’m pleased with what I’ve done so far. It’s been fun but I’m ready to hit the trails!
 
Buggyman

Buggyman

Well-Known Member
Lifetime Member
Supporting Member
Jan 3, 2020
38,667
324,431
113
ne. ohio
Ownership

  1. 700-2
I watch way too many car shows and am amazed by their customization skills. I can’t hold a candle to what they do, but I have the mind for it!!, just not the equipment or the ability. I’m pleased with what I’ve done so far. It’s been fun but I’m ready to hit the trails!
For sure there is a lot of talent out there but now it's time to get down and dirty nomoomp
 
Rayger143

Rayger143

Well-Known Member
Lifetime Member
Supporting Member
Aug 5, 2020
2,858
24,878
113
Winfield, BC Canada
Ownership

  1. 1000-5
Finally. TurnPro finished
View attachment 438309View attachment 438310View attachment 438311
Auxbeam 6 Gang
View attachment 438312

Underhood wiring complete along with custom made mud/splash guard for the tunnel area.

View attachment 438313View attachment 438314
View attachment 438316
Finally the @Hondasxs cube lights on custom brackets on the lower flip windshield brackets
View attachment 438315
I really like the all black. Sweet lookin ride ya got there. Nice work.
 
Remington

Remington

Fife! POIDH Enforcement Officer
Lifetime Member
Supporting Member
Jul 24, 2016
19,553
112,328
113
Michigan
Ownership

  1. 1000-5

  2. Talon X
TurnPro finished
Img 8387 jpeg
Well fuc!
Wish they had that set up when I got mine🤨
Always something better😂
Looks sleek and very nice.
 
  • Like
Reactions: EMAW
advertisement