P1000 Huntin Rig!!

[NMelkaholic]

I have the very same Pioneer, I put the Seizmik upper doors on it this winter.

How you likin it so far??

 

[Montecresto]

Installed a plate to make everything a lil more rigid....

View attachment 102472

There’s a member here that makes a very cool custom plate, any configuration you want that perfectly fits that spot where the warning label is !!

 

[NMelkaholic]

Next was the Axe and Fire extinguisher ....

 

[Montecresto]

Shovel mount was next...

View attachment 102476

Oh man, I’d hook that shovel on a tree and rip it right off on the rough brushy and tight trails I ride... I like the idea of carrying one though, I sure could have used one recently.

 

[Montecresto]

How you likin it so far??

Very happy with it....

 

[NMelkaholic]

Next was the Front and Rear A-arm covers...

 

[Montecresto]

Nice!!! We hunt near there..Ocate, Wagonmound, Springer. small world!!

Yep, beautiful country....

 

[Montecresto]

Next was the Front and Rear A-arm covers...

View attachment 102480 View attachment 102481

I guess this is your build thread.

 

[NMelkaholic]

Very happy with it....

Ride on.... that's what I wanna hear!! I am sure we will be as well!!

 

[NMelkaholic]

I guess this is your build thread.

Ummm... I guess so LOL!!!

 

[NMelkaholic]

Just had hernia surgery couple days ago ... so I have to take a couple of weeks off from the Rig... I have only been workin on it for a few hours every Saturday.... Next gunna install my Roto Pax 1 fuel 1 water... and a front D-ring so I have a place to tie down.

I also made a bow carrier for My wife's and my bow... I will get some pics of that.

I normally put a lift kit on everything I own.... but this rig has 13" clearance, gunna leave it stock and see how she does??

Am I missin anything?? feed back is greatly appreciated!!

Thanx for lookin!!

 

[Montecresto]

Just had hernia surgery couple days ago ... so I have to take a couple of weeks off from the Rig... I have only been workin on it for a few hours every Saturday.... Next gunna install my Roto Pax 1 fuel 1 water... and a front D-ring so I have a place to tie down.

I also made a bow carrier for My wife's and my bow... I will get some pics of that.

I normally put a lift kit on everything I own.... but this rig has 13" clearance, gunna leave it stock and see how she does??

Am I missin anything?? feed back is greatly appreciated!!

Thanx for lookin!!

You’ll be fine. When you wear out the stockers you can go 2” taller on tires and have 14” clearance...

 

[NMelkaholic]

You’ll be fine. When you wear out the stockers you can go 2” taller on tires and have 14” clearance...

Yes Sir!!! that is the plan... I will have to do some research on the best tires to go with!!! our unit is all Lava rock!!! shreds tires!!!
On our Polaris's we ran 8 ply..

 

[NMelkaholic]

Guess I should have posted this in the Build section of the forum???

 

[Montecresto]

Guess I should have posted this in the Build section of the forum???

Ask @Hondasxs and he’ll move it for you I’m sure..

 

[Montecresto]

Yes Sir!!! that is the plan... I will have to do some research on the best tires to go with!!! our unit is all Lava rock!!! shreds tires!!!
On our Polaris's we ran 8 ply..

Yep, most all of us go to 8 ply. There’s plenty of discussions here on tires per terrain.

 

[NMelkaholic]

Well, after the archery elk hunt I discovered I need to do a few things to the rig in order to get it like I want/need.. Big thanx to JTW for helping me out with what I needed !! Thanx brotha!!!
ordered the SATV arched forward A arms for front and rear, all new ball joints... 28" Bezerkers, 12"rims (5+2).. light bar below windshield, under dash cargo net, mid panel cargo area for dust!!, and a bunch of other stuff I can not remember right now!!

Here are a few pics of the A arms and tires installed this weekend, I still need to finish the drivers rear and check alignment on all of it!!

 

[NMelkaholic]

 

[NMelkaholic]

 

[NMelkaholic]

I gained a lot of clearance!