P1000 JACKAL's 2024 P1K5D Bolt-On Bonanza

[JACKAL]

So getting ready for Honda Pioneer Round 4 - Picking up a 2024 Pioneer 1000-5 Deluxe in Black Forest Green on Tuesday 3/12/24

Since getting my first two Pioneers a 2015 P500 & 2016 P1K5D a few months apart in fall of 2015, then going bonkers on them, have learned a lot after having them 5 years and putting 14K miles on them. Learning what works, and what doesn't work so well and what not to do driving them.

Long and storied threads on those two here:

P500 - Jackal's P500

Will be picking up my Pioneer 500 this Friday 8/7 and already have about $4500 of accessories on the way. Will post before & after pics as I go along. :) Nothing outstanding at first but these things take on a life all unto themselves. And so it begins....... The addiction. 2015 Honda Pioneer...

hondasxs.com

P1000 - Jackal's P1000-5

Well just as well get this started off. For those of you that followed along on my Pioneer 500 build, I pretty much bought all my accessories before I even had the machine in hand and within 3 weeks of having it home it was all tricked out like I wanted. Thanks to @HondaProKevin from Honda of...

hondasxs.com

Then in December 2017 got a new 2018 Pioneer 1000-5 Limited Edition unlike the prior two, all I added was a windshield, Roof, Hi-Beam LED bar and Auto Backup lights from the HondaSXS store. Drove that machine for over 12K miles with no breakage beyond a few bent tie-rods from driver error.

P1000 - 2018 P1K5LE / I4WD Review

I finally got to take the LE out for a proper ride yesterday. Brought it home on 12/21 but between weather and being gone had not taken it out on trails yet. Many have asked and are curious about the I4WD performance compared to the regular 4WD & 4WD Lock modes of all the other P1K's. For...

hondasxs.com

So now going to try the newest P1K5D with all the revisions made over the past 8 years, looking forward to several years of service from it.

Like I did in fall of 2015 been gathering all my goodies even since May 2023 in prep for getting this machine. Without further ado here is my bombastic list of bolt on, plug in accessories to enhance, and protect the machine & myself out on the trails. Much like the #NTC thread the list is long but distinguished

Parts Acquired so far, all items purchased through club store up to the Honda accessory front bumper, which was included with my SXS purchase as part of Honda's $250 Accessory allowance program.

Be sure and hit up @Hondasxs for great prices as an authorized @SuperATV dealer to club members.

Honda SxS Club Online Store

Custom parts and accessories for your HondaSxS! The Honda SxS Club Online Store - Featuring the Honda Talon 1000, Pioneer 1000, Pioneer 700, and Pioneer 500.

store.hondasxs.com

Relay / Isolator : 80-AMP Battery Isolator or Relay - Compare to Stinger brand.
Relay Control Switch: Pre-Wired Relay Control Switch for AUX and Key-on usage. For Stinger, Cole Hersee or any.
Fuse Box: Fuse box with negative bus. 6 or 12 fuse unit, includes variety of fuses. FuseBox
Key on Power Pigtail: 2022+ Honda Power ACC pin for Key-on power. Pioneer, Talon
Seat Belt Bypass: Harness accessory seat belt override bypass kit - Honda PIONEER 1000 & 700
High Beam Auto Add a Light: Add-A-Light!, High Beam LED Light Bar for Honda Pioneer 1000.
Plug n Play Auto Backup Light Kit: Plug-n-play Auto Backup Light High Mount Kit for Honda Pioneer 1000 / 700
Work Light Trigger for Auto Backup Light Kit: Work light Trigger for Auto Backup Light Kit - Honda Pioneer 1000 and 700!
Pre-Wired & Lighted Winch in /out switch: Pre-Wired Winch in/out flush mount switch for Honda Pioneer, Talon.
Lighted Headlight Switch Plug n Play: Lighted Headlight Switch Retrofit for Honda Pioneer 1000 - Plug-n-Play
Quick Charge USB 3.0 w/ LED Voltmeter: Quick Charge 3.0 Dual USB Rocker Switch w/LED Voltmeter
P1K Oversized switch adapter: Honda Pioneer 1000/700 Oversized Switch Adapter Honda Pioneer 1000
Viper V2 Wide-spool 6000 Winch: Viper V2 UTV Widespool Winch - a NEW GENERATION OF VIPER!
Viper UTV Winch Mount Plate: Viper UTV Winch Mount Plate - Honda
TurnPro Plug N Play Sequential LED Turn Signal Kit w/ Horn & Hazard: NEW - Honda Pioneer 520 / 700 / 1000 Models Plug & Play Signal System

SuperATV P1K MaxDrive Power Flip Windshield: https://www.superatv.com/honda-pioneer-1000-maxdrive-power-flip-windshield
SuperATV P1K Tinted Roof: https://www.superatv.com/honda-pioneer-1000-tinted-roof-group
SuperATV P1K5 Rear Flip Tinted Windshield: https://www.superatv.com/honda-pioneer-1000-5-rear-windshield
SuperATV P1K Full SkidPlate ½”: https://www.superatv.com/honda-pioneer-1000-full-skid-plate
SuperATV P1K5 Workmaster Rear Bumper: https://www.superatv.com/honda-pioneer-1000-5-workmaster-rear-bumper
LED Headlights w/ DRL & Turn Signals: https://www.amazon.com/gp/product/B0CRR4RHW4/?tag=sxsweb24-20

Factory UTV P1K (2022+) UHMW A-Arm Guards: Honda Pioneer (2022+) UHMW A-Arm Guards
Honda Front Bumper P1K 2022+ PART # 08P71-HL4-AK0: https://dreamshop.honda.com/s/?divisionId=3&modelid=SXS10M5DR
Kemimoto UTV Rear Mirror: Amazon.com
Kemimoto Rear Bed non-skid rubber Liner: Amazon.com
Kemimoto UTV Dome Light: Amazon.com
Kemimoto Soft Mid /Rear Panel Net: Amazon.com
Tires – BF Goodrich Mud Terrain T/A KM3 UTV Front: 28x9x14 & Rear 28X11X14: BFGoodrich Mud Terrain T/A KM3 Tire | Tires and Wheels | Rocky Mountain ATV/MC

Bandit level 4 shocks: https://www.banditutvsuspension.com/product-page/all-4-level-4-honda-pioneer-1000-shocks

Big Ole Pile o Parts:

 

[Admin]

 

[JACKAL]

Just got home and Allie wasted no time claiming her seat....

To be continued........

 

[Hondasxs]

Welcome back to the club. lol.
That looks like a lot of work.

 

[JACKAL]

Tinkering around with a piece of P1K OEM skid plate. Bolting my electric components to it. Hoping to be able to make it fit on a level spot such as above battery or behind air pre-filter lid.

80 Amp Isolater, Fuse box, and Relay for 6K Viper V2 winch. Material is easy to work with and non-conductive. Going to be a long 5 days before picking up the Pioneer on Tuesday.

 

[JACKAL]

OK got around to snapping a few pictures, the wires in the background are not tidied up yet as I have the lighted headlight switch, work light / reverse over-ride switch, and TurnPro turn signal kit to install tomorrow.

Complete OEM under the hood as from factory:

Plate installed with 80 Amp relay, 12 position fuse box, Winch Relay, & misc. wiring:

The ugly angle / untied wires behind (work in progress)

Front Bumper, Viper V2 6K Winch, & Add a light / auto high beam 12' light bar from club store, installed from last night:

 

[JACKAL]

So after about 20 hours over 3 days of cussin, discussin, head scratching, and a lot of sore muscles (I'm a softie not used to being on concrete all day) got most everything installed.

By far the most time consuming task was the routing of wires, making the electrical connections (even though 95% was simply plug and play. After scratching and cutting my fat arms up trying to access the OEM switches (Replace headlight rocker switch with a lighted one) and remove the three generic ON/OFF oversize rockers, I decided to try an alternative non destructive removal method.

I took a long shaft flat blade screw driver and ground it down flat like a thick feeler gauge and inserted it carefully from the cabin side to depress the rockers retaining tabs. It worked out good just have to be careful.

 

[JACKAL]

I didn't bother taking pictures of each install, I was too worn out and much of my time was in poor lighting for pictures. So here is the end result. Only have 5 miles on it, need to hit the trails. I think I'm really going to like the tinted SuperATV roof, not sure how it will look after several muddy rides though 🤨

Really liking the SATV MaxDrive Power Flip windshield, can open it to any position and ride with it adjusting for coverage or air to personal preference.

 

[chucksmith0706]

I like that roof. Looks good.


Sent from my iPhone using Tapatalk

 

[JACKAL]

One of the most confusing things I ran across was installing the @SuperATV Skid Plates on my 2024 Pioneer 1000-5. Now I know they have it all set up to be universal for all years of P1000's, but given the considerable differences in 2022+ models they really need to offer a completely updated product for the current and future models.

The 2022+ have enhanced underbelly coverage that is a vast improvement for many owners of 2016 - 2021 models, however the rocks where I live require heavy duty stuff to fully protect the undercarriage.

OEM Underbelly 2024 P1K5D - Note the Sides have some protection were non-existent prior to 2022 MY

Each side plate is secured by 7 bolts, ALL OEM holes with threads or welded nuts are circled in ORANGE - NOT A SINGLE ONE OF THESE HOLES WERE USED????

All holes required to attach the @SuperATV skid plates are circled in YELLOW with Rivnuts installed.

WHY couldn't the product be updated to use the OEM holes only a few inches away. had to drill 9 holes instead of just 2???

When it was all said and done pretty sure there was 44 bolts to secure all 4 sections of the SATV skid plate which DID NOT USE 26 OEM attachment locations of 32 that were present. Not mad or disappointed, just pointing out one size fits all, while cost efficient for the manufacturer, is not best for the end user experience. Just my observation.

That said, skid plates are very securely attached and all drain holes are in proper locations and large enough to easily service the machine. Note SATV doesn't offer A-Arm guard, so went with FUTV (Factory UTV) brand, they installed in 20 minutes and are equally rugged.

The full Monty:

 

[JACKAL]

Here are my thoughts on the following items purchased through the @Hondasxs store:

Overall - Every Pre-wired item was very high quality and most all were truly plug and play into the OEM wire harness.

For those considering a battery disconnect and or dual battery setup, these four items make it super simple as a complete foundation to add all other electrical accessories to.

Relay / Isolator : 80-AMP Battery Isolator or Relay - Compare to Stinger brand.
Relay Control Switch: Pre-Wired Relay Control Switch for AUX and Key-on usage. For Stinger, Cole Hersee or any.
Fuse Box: Fuse box with negative bus. 6 or 12 fuse unit, includes variety of fuses. FuseBox
Key on Power Pigtail: 2022+ Honda Power ACC pin for Key-on power. Pioneer, Talon

The Pre-Wired Relay control switch is the secret sauce for total ease of use and choosing the three options of:
1. OFF - Complete Battery disconnect - eliminated any chance of parasitic battery drain.
2. Key-On power - Just as it says everything is energized and key is turned on.
3. ON - Everything can be used without Key-on or engine running.

I was considering just the 6 spot fuse box instead of the 12, glad I opted for the 12 position, when all finished I had used 9 of the 12 positions feeding key on power to all my added components.


These three accessories could not be easier to set-up and use, literally plug into existing OEM lighting system for quick effective additional lighting front and rear.

High Beam Auto Add a Light Plug-N-Play: Add-A-Light!, High Beam LED Light Bar for Honda Pioneer 1000.
Auto Backup Light Kit Plug-N-Play: Plug-n-play Auto Backup Light High Mount Kit for Honda Pioneer 1000 / 700
Work Light Trigger for Auto Backup Light Kit: Work light Trigger for Auto Backup Light Kit - Honda Pioneer 1000 and 700!

The high beam add-a-light is a very bright 12" light bar that mounts to either the front bumper or the fairlead mount, tucked in out of the way from trail debris, snaps right into the headlight harness a few inches from the Coolant fill port under the hood. Literally a 5 minute install.

The auto backup light kit plugs right into the factory backup alarm wiring plug just above the oil filter location, from there route the harness up the B-pillar, back the top drivers side then across the back, the included OEM style clamps snap on in seconds. This install can be done in approximately 15 minutes with ease. To get the most out of this accessory I highly recommend the Work Light Trigger for the Auto backup kit. This pre wired plug-n-play switch and harness lets you kick on the rear light on demand or set to auto on with reverse. While plugging into the OEM connectors with ease, the recommended harness routing follows the OEM main wiring harness, starting up front, go down the passenger side, then up and across the sub transmission area to the drivers side, then back to the Backup plug above the Oil Filter cover. I followed this method and the length was perfect.

Install note in this item, it is super helpful to have skid plates off and raise front of machine up to follow the OEM harness from front to back giving full view and access to the areas you need without crawling all over the machine.

You have an OEM headlight switch but can't find it in the dark? Well then this is the answer:

Lighted Headlight Switch Plug n Play: Lighted Headlight Switch Retrofit for Honda Pioneer 1000 - Plug-n-Play

The above switch is the OEM lighted version for another MY and trim level and has been re-wired to plug into the current wiring harness. Works great and you can now see your headlight switch.



TurnPro Plug N Play Sequential LED Turn Signal Kit w/ Horn & Hazard: NEW - Honda Pioneer 520 / 700 / 1000 Models Plug & Play Signal System

This turn signal kit with horn, hazard, and sequential LEDs up front are great, all connectors plug right into factory harness using rear LED tail lights for turn signal and hazard flasher, the front LEDs are very nice, surprisingly bright, and easy to attach.

Install note - if going to add the work light trigger above, run them both at the same time and save yourself 30 minutes of securing wiring harnesses, they follow the exact same route keeping all wiring tidy and away from moving components and heat.

Viper V2 Wide-spool 6000 Winch: Viper V2 UTV Widespool Winch - a NEW GENERATION OF VIPER!
Viper UTV Winch Mount Plate: Viper UTV Winch Mount Plate - Honda

This item fits great on the Pioneer 1000 and the ONLY issue is the guy at MotoAlliance who is responsible for the hardware kit coming with their winches. Would it kill you to include bolts 1/4" longer bolts than currently so you can start the damn threads with both the included washers on each bolt ?!?!?!?! Because of the aforementioned it is a royal PITA even with two people to try an mount the winch to the winch plate, 5 minute job can take an hour, or 20 minutes if you get smart and stick the U-bolts in first, than mount the winch to the plate, then attach everything to the frame bass-ackwards of the included directions.


One item I did not have much enthusiasm for that far exceeded my expectations was this $24 Kemimoto dome light. There are multiple versions, but this one linked below has a Li-on battery or can be hard wired and remove at will from ROPS with a big Velcro strap and rubber base, the main part is cast aluminum. This thing is super bright on highest setting and a simple 30 degree rotation light up front or rear completely.

Kemimoto UTV Dome Light: Amazon.com




I made a short 5 mile run late last night and I swear the OEM headlights were dimmer than a Dollar-Tree flashlight. I intend to replace the bulbs with 20K lumen LED bulbs.

 

[lee]

So @JACKAL Cindy wants to know how’s it feel to be part of the club again?

Haha, p1k looks good, I’ll check it out next weekend.

 

[JACKAL]

So @JACKAL Cindy wants to know how’s it feel to be part of the club again?

Haha, p1k looks good, I’ll check it out next weekend.

It feels good, took wife out in it for a short 10 mile jaunt. She said OMG this thing is so quiet.

FYI all the little things that went into making it what it is from the original version didn't fall deaf on me. Crawling all over running the turn signal and back -up light kit seen so many subtle unseen changes that I'm sure makes a considerably better rider experience from air, dust, engine heat, mud mitigation changes. Very happy with this machine. Got something I know will get me home no matter what, even though the Yamaflaw hasn't had any issues in 5K miles. I'm just prejudice against any CVT simple as that.

Be great to see you guys next week.

 

[lee]

The 2022+ have enhanced underbelly coverage that is a vast improvement for many owners, however the rocks where I live require heavy duty stuff to fully protect the undercarriage.

@JACKAL how dose the skidplate play with the plastic guard in the front fender well?
I'm guessing that inner fender plate was put there for a reason, did you notice how thick it is?

Being able to defect a stick under the vehicle and keep it there is a good thing.
But I have been afraid the after market skids would allow a stick between the OEM plate and the skid.
Bouncing around between the underside of the floor and the skid is probably not a good thing.

 

[JACKAL]

@JACKAL how dose the skidplate play with the plastic guard in the front fender well?
I'm guessing that inner fender plate was put there for a reason, did you notice how thick it is?

Being able to defect a stick under the vehicle and keep it there is a good thing.
But I have been afraid the after market skids would allow a stick between the OEM plate and the skid.
Bouncing around between the underside of the floor and the skid is probably not a good thing.

I did notice how beefy the inner front fender well was, very nice. SuperATV did take this into account on their install instructions.

This is what the instructions called for and I followed them. It bolted up tight after the 2"x3" bump was trimmed. Note I only cut the Honda plastic just enough so it was flush with the metal frame tubing it covered.

T

 

[JACKAL]

Well got it broken in good this past weekend ran about 200 miles with @Hondasxs, @TripleB, @Vondy, @Blownzuki, @EMAW, etc. Had a great run hitting several trails none of us have been on before.

No carnage to speak of so Hondasxs was bored and we jumped on Trail 24 in New River Until to Standing Stone 🪨 (Black / Most Difficult rated) we got there but not until we had a 3 hrs. winch fest to go 100 yards. LOL

Got about 350 miles on the new Pioneer 1000 very happy with how everything works out.

@TripleB have many great videos and pictures maybe he will share or link them here.

 

[JACKAL]

Snapshot taken at Ruins POI in NE corner of Windrock passing through.

 

[JACKAL]

@100Acre you were asking about a GPS mounting solution for the Pioneer 1000 in another thread (P500). Rather than derail it. Here is what I use, an aluminum 1" ball mount to the dash and tablet holder, a 2" short arm, and the ARKON TAB005KL tablet holder. This holds my Samsung Galaxy Tab S9FE 10.5" tablet running Lifetime Trail Maps software.

Note: The ARKON TAB005KL tablet holder is adjustable and will fit everything from 7" to 11" tablet sizes with most rugged cases affixed.

ARKON Mounts Universal Locking... Amazon.com

https://www.amazon.com/dp/B0CT8GSBZJ?tag=sxsweb24-20

RAM Mounts RAM-B-201U Double Socket Arm (Medium) Compatible with RAM B Size 1" Ball Components Amazon.com

 

[JACKAL]

Had a group from Wisconsin hire me to guide them to Brushy Mountain last weekend. Took them on the modified loop a handful of us ran on 3/23/24 plus added a few new sections. Was a good ride, with 600 miles on the new P1K now. I sure appreciate how quiet it rides and the versatility of the accessories I chose this time around.

 

[JACKAL]

So after a few rides, I forgot how much mud / muddy water is slung up on the rear portion around the roll bar and back window, literally my rear panel 6" in from each outer edge gets caked even with OEM tires (CIRCLED BELOW) I was super happy with the coverage the Mud Busters XL worked on my RMAX so ordered a set for the P1K.

Mud Busters arrived today. Should put a stop to some of the mess on the rear panel inside.

Really happy with the install process and how sturdy the hardware attached on the rear 4 pieces. This set is specifically for the 2022+ P1K and they were precision cut around every new change in plastic front and rear for a perfect fit.

Don't drop anything because there is zero extra hardware. Somewhere a 6mm ny-lock nut is hiding out with 37 10mm sockets in my shop. Was dark when finished so didn't take any pictures installed. will snap a few tomorrow and update.

Update: Installed Pics

 

[CSmock]

Hey @JACKAL , I thought I saw your rig at the prison this past Saturday. My daughter and I rode over there from Windrock (trail 43 to Guillotine Ln) Thanks for sharing your build & adventures.

Chad