P1000m5 My take on bed extender

[bigdeal]

Cut this out the other day. Still have to paint, modify pins, and paint! I will also be getting two cup holders to go in the other holes. I cut the plastic that is over the 1" square tube on the sides of the bed. It has 3/4" square stock that goes down in the top about 1" and the triangle braces go down to the place where the regular bed extender goes with two pins that pin though it. Its only 16ga. but with the bends it is very strong. Went to the parts store and got the door trim and put around the cooler and bucket holes. Works really good so far!

 

[Admin]

 

[GlockMeister]

View attachment 18115 View attachment 18116
Cut this out the other day. Still have to paint, modify pins, and paint! I will also be getting two cup holders to go in the other holes. I cut the plastic that is over the 1" square tube on the sides of the bed. It has 3/4" square stock that goes down in the top about 1" and the triangle braces go down to the place where the regular bed extender goes with two pins that pin though it. Its only 16ga. but with the bends it is very strong. Went to the parts store and got the door trim and put around the cooler and bucket holes. Works really good so far!

Looks good..I like it.

 

[joeymt33]

It does look good. That's a big deal!

 

[Bradmc87]

That's by far my favorite bed extender! Nice man

 

[bigdeal]

Thanks, I got it painted and fixed the way it pines in. This thing is solid now. I will get some more pictures soon.

 

[fish]

Very nice, and functional to boot. Great job.

 

[Gator]

That's by far my favorite bed extender! Nice man

X2

 

[sajnaj]

im more jealous of the plasma table that made that plate

 

[bigdeal]

I teach welding at the Tech Collage in town. That's where the table is. The boys at school learned a lot that day!

 

[Stauvo]

Very nice and clean looking.

 

[oilslick]

Awesome, makes mine seem inadequate!

 

[CopenHagen]

View attachment 18115 View attachment 18116
Cut this out the other day. Still have to paint, modify pins, and paint! I will also be getting two cup holders to go in the other holes. I cut the plastic that is over the 1" square tube on the sides of the bed. It has 3/4" square stock that goes down in the top about 1" and the triangle braces go down to the place where the regular bed extender goes with two pins that pin though it. Its only 16ga. but with the bends it is very strong. Went to the parts store and got the door trim and put around the cooler and bucket holes. Works really good so far!

This is why love this site for people that think outside the box

 

[joeymt33]

This is why love this site for people that think outside the box

Absolutely! This is the best pioneer site there is. I've learned so much from these guys and still continue to learn stuff.

Welcome aboard

 

[moparornocar]

That is bad ass! I'll take one shipped to 54742

 

[Delton]

Thats what I need to take water to our micro pigs lol. Right now I pull small trailer or throw bucket in bed. Bet I'd lose alot less water with this one lol. Nice job!

 

[walexa07]

Awesome. Do you plan to make more and sell them?

 

[moparornocar]

Awesome. Do you plan to make more and sell them?

Get in line buddy! Lol

 

[bigdeal]

I'll have to look into it. If I did, I think I would do it as a kit. So that it could all ship flat.

 

[moparornocar]

If you did I'd definitely be in the market!

 

[walexa07]

That would work!