P1000 Outback Max Tire

[Hachez]

Hi,

I just recently bought a new P1K-5 and was wondering if anyone ever ran STI Outback Max 28 x 10 - 14 all on 4 corners? Any rubbing issues? I know the rear tires are 11's but will 10's be enough?

 

[Admin]

 

[Hondoman]

Hi,

I just recently bought a new P1K-5 and was wondering if anyone ever ran STI Outback Max 28 x 10 - 14 all on 4 corners? Any rubbing issues? I know the rear tires are 11's but will 10's be enough?

I cant answer that directly, but outbacks are true to size (height) while most tires are not. My tensor regulators didn't rub before I added a bracket lift and offset a arms. I wouldn't be surprised if 28" outbacks rubbed some.

Didnt @aauman88 have some 28's on at one point?

 

[aauman88]

I did have 28” OutBack max but I had 2.5” bracket lift. No issues there but not sure if they would clear without the lift.

Now I have 32” ones and they are still my favorite wheels. My buddy has 30” versions on his

 

[Hachez]

I did have 28” OutBack max but I had 2.5” bracket lift. No issues there but not sure if they would clear without the lift.

is it because they are too wide? or because of the height?

 

[aauman88]

Not sure man. My Honda had that setup when I bought it. The fronts being wider could be fixed with wheel spacers and I think the height would be ok without any lift but not sure

 

[WhiteLightning]

I had a set of 30s they were great tire for the mud with the exception of they were way to heavy.... I had a noticeable loss of power.

Sent from my SM-G965U using Tapatalk

 

[WhiteLightning]

They looked good also

Sent from my SM-G965U using Tapatalk