BOX1

P700 Reasonable Power Up

Ems-Cam

Ems-Cam

Well-Known Member
Lifetime Member
May 22, 2016
252
336
63
Alberta
Ownership

  1. 700-4
I bought a Mystic switch panel to install a light bar and winch, Ram mount etc. I'm wondering what kind of space I will find behind the warning label when I drill it out?

It's not bad for space behind the label, no problem with room for switches.


Sent from my iPhone using Tapatalk
 
Montecresto

Montecresto

Montecresto el segundo
Lifetime Member
Supporting Member
Club Contributor
Jan 17, 2016
22,587
34,173
113
Eastern oklahoma
Ownership

  1. Other Brand

  2. 500

  3. 1000-3

  4. 1000-5

  5. Talon x4
It's not bad for space behind the label, no problem with room for switches.


Sent from my iPhone using Tapatalk
Yep, that was my concern, thanks EMS.
 
  • Like
Reactions: Ems-Cam
Ems-Cam

Ems-Cam

Well-Known Member
Lifetime Member
May 22, 2016
252
336
63
Alberta
Ownership

  1. 700-4
I used a Doebeck, K&N, and new exhaust tip on my P700. I didn't do any timed runs like I'm doing on the pioneer 1000. However I did notice that it would spin the tires more easily, it would get out of the hole quicker. That's what the butt dyno said anyway.
Which generation Dobeck did you use?
 
Ems-Cam

Ems-Cam

Well-Known Member
Lifetime Member
May 22, 2016
252
336
63
Alberta
Ownership

  1. 700-4
It only lists the Gen 4 now. I will order that one. I contacted power commander about theirs, they don't offer any discount for first responders.
 
Deerhunterrob

Deerhunterrob

Member
Lifetime Member
Jan 14, 2017
57
85
18
NE ALABAMA
Ownership

  1. 700-2
It should be better then! Lol


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: Ems-Cam
Tflynn

Tflynn

Not a liberal
Lifetime Member
Club Contributor
Jan 12, 2015
2,502
3,844
113
Northern California
Ownership

  1. 700-2
Awesome! I hope you give us a good review and install walk through
 
swsebek

swsebek

Red,White And Blue Collar Soul
Lifetime Member
May 4, 2014
2,854
5,828
113
pa
Ownership

  1. 700-4
looking forward to your review.
 
Ratchetdan

Ratchetdan

Member
Apr 14, 2017
29
26
13
Alaska
Ownership

  1. 700-4

I effed up the muffler after a bolt broke off. then drill bit drilling out the bolt. kinda embarassing. will try to get better video of it in action


Which 3D tip did you order? Seen one for a 500 rincon that may work but not sure...
 
Deerhunterrob

Deerhunterrob

Member
Lifetime Member
Jan 14, 2017
57
85
18
NE ALABAMA
Ownership

  1. 700-2
What settings are you running on your programmer?


Sent from my iPad using Tapatalk

Not sure I'll have to check swapped jobs an have been really busy lately



Sent from my iPhone using Tapatalk
 
Ems-Cam

Ems-Cam

Well-Known Member
Lifetime Member
May 22, 2016
252
336
63
Alberta
Ownership

  1. 700-4
When you get a moment that would be great. Thanks bud.
 
Ems-Cam

Ems-Cam

Well-Known Member
Lifetime Member
May 22, 2016
252
336
63
Alberta
Ownership

  1. 700-4
So after installing the chip and riding where I did last year, I can say for sure there is a very noticeable difference in power. Yes the bigger machines pass me on the open but hills, it easily holds its own. Heat is fine, no issues. And with the shock upgrade, this is a completely different machine. I do need to slow down and make it down shift, but after that it's great. I'm getting to be known as the one who pulls everyone home.


Sent from my iPhone using Tapatalk
 
BOX2
box3

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!