P1000m5 Replacement front cup holders 1000-5

[Wes24]

We’ve all noticed the cup holders in the pioneer 1000-5 are wayyyy too small (even for a can of beer with no coozie) let alone a giant 32oz yeti tumbler. The stock ones pop out, but has anyone found replacement ones that will fit or modified the hole to hold ones that fit? Pictures and instructions VERY APPRECIATED

 

[Admin]

 

[GlockMeister]

These work well, i just opened the hole up with a dremel.
Amarine-made 2pcs Stainless Steel Cup Drink Holder with Drain Marine Boat Rv Camper https://www.amazon.com/dp/B009DCGT74/?tag=sxsweb24-20

 

[Wes24]

These work well, i just opened the hole up with a dremel.
Amarine-made 2pcs Stainless Steel Cup Drink Holder with Drain Marine Boat Rv Camper https://www.amazon.com/dp/B009DCGT74/?tag=sxsweb24-20
View attachment 103171

Thanks very helpful. Can you send a pic of the attachment you used on he dremel?

 

[Tuco69]

Replace mine with Polaris cup holders. Black like the 1000 dash so it blends in, can’t even tell they weren’t original. Ordered online.

 

[Hondoman]

These work well, i just opened the hole up with a dremel.
Amarine-made 2pcs Stainless Steel Cup Drink Holder with Drain Marine Boat Rv Camper https://www.amazon.com/dp/B009DCGT74/?tag=sxsweb24-20
View attachment 103171

Same ones I just installed last weekend. I used a dremel as well with the round cutoff discs.

 

[JTW]

I went with the plastic inserts... and used a bit like this

 

[Montecresto]

Replace mine with Polaris cup holders. Black like the 1000 dash so it blends in, can’t even tell they weren’t original. Ordered online.

Have a link. Improving a Honda with Polaris parts, feature that..

 

[GlockMeister]

Thanks very helpful. Can you send a pic of the attachment you used on he dremel?

I just used a sanding drum and took a little at a time so they fit really tight.

 

[Fl-Cracker]

I made these for mine because my snorkel comes up thru my passenger cup holder and I needed to mount my switch panel anyway
If I remember right it’s 9”x10”break at 5”x5” two 3” holes

 

[Chriscoe]

We’ve all noticed the cup holders in the pioneer 1000-5 are wayyyy too small (even for a can of beer with no coozie) let alone a giant 32oz yeti tumbler. The stock ones pop out, but has anyone found replacement ones that will fit or modified the hole to hold ones that fit? Pictures and instructions VERY APPRECIATED

Someone had posted this in another thread....... or maybe on Facebook. I was going to give it a shot. Need something to “hold my beer” when I don’t have a passenger.



Sent from my iPhone using Tapatalk

 

[Wes24]

These work well, i just opened the hole up with a dremel.
Amarine-made 2pcs Stainless Steel Cup Drink Holder with Drain Marine Boat Rv Camper https://www.amazon.com/dp/B009DCGT74/?tag=sxsweb24-20
View attachment 103171

Do you know if this holds a 30 oz yeti tumbler?

 

[Tuco69]

Have a link. Improving a Honda with Polaris parts, feature that..

Sorry for the late reply. Heck I’ll try to find a link, senior moment, it was about 8 months ago......

 

[GlockMeister]

Do you know if this holds a 30 oz yeti tumbler?

Not 100% but i would think so

 

[JTW]

Do you know if this holds a 30 oz yeti tumbler?

I’ve had the Ozark trail tumblers in mine... I have the plastic version though. But these are all pretty standard and generic cup holders used in boats a lot.

 

[1Ktrailrider]

I bought a pair of led lighted stainless cup holders. They will fit a yeti.

 

[TheHoover]

First thing I did! On the first ride around the neighborhood I spill my Yeti all over my brand new toy!! Fixed it two days later(Amazon prime). I still can’t believe Honda thought these were okay...

 

[swann549]

Replace mine with Polaris cup holders. Black like the 1000 dash so it blends in, can’t even tell they weren’t original. Ordered online.

Did you have to trim any for the Polaris cup holders to fit?

 

[Tuco69]

Did you have to trim any for the Polaris cup holders to fit?

I did.

 

[swann549]

I did.

Thanks @Tuco69! Im prob going the same route

 

[GPR1500SC]

I like the black plastic cup holders better then the stainless ones because they are slightly bigger on the inside then the stainless steel ones and your mug will fit better.