P1000m3 Tracks

[Rockydog]

Any one know what the outside dimensions of a pioneer 3-1000 with Camoplast tracks on it would be.


Sent from my iPhone using Tapatalk

 

[patpete]

About 72”

 

[DDDonkey]

About 72”

View attachment 151354

That pioneer looks AWESOME!

 

[Rockydog]

That pioneer looks AWESOME!

Looks good. Thanks for the info. What type of tracks are those. And are the rear tracks wider in single width than the front.


Sent from my iPhone using Tapatalk

 

[patpete]

I will have to verify but I believe fronts are 11” and rears are 12”. My 72” is based on rear as it don’t turn and I think is widest point

 

[patpete]

Camoplast ts4 tracks , 30” maxxis zilla tires, 2-1/2” highlifter lift, highlifter arched forward a-arms, custom front track mounts, strongmade front bumper, led light bars, boss audio Bluetooth stereo, dual batteries, modified heater with defroster, switch wired in for manual fan control, dual USB ports

 

[patpete]

Some pics

 

[patpete]

Sorry got a pic of sold pullurass ranger

 

[Rockydog]

Sorry got a pic of sold pullurass ranger

View attachment 151394

Nice pictures.


Sent from my iPhone using Tapatalk

 

[thomasvandermars]

Mulan pass Montana

 

[Rustan]

Do the tracks add much height to the pioneer compared to stock tires?

Sent from my Pixel 2 XL using Tapatalk

 

[patpete]

I would have to remeasure but it was either 4 or 6” added height and 6” width per side so I went from 60 to 72”

 

[Jefferson87]

Do the tracks add much height to the pioneer compared to stock tires?

Sent from my Pixel 2 XL using Tapatalk

Your question made me curious so I went and measured mine.

Roughly 16.5" floor to center of drive sprocket.

So you'd think the same clearance as 35s but when you figure a lot of tires don't measure true, then tires squat, especially at 2-3 psi in the snow. They're probably closer to a ~38" tire but you get the gearing of a 14" tire

 

[Winterrider]

Anyone with the I 4WD have any issues running tracks at all?

 

[Jefferson87]

Anyone with the I 4WD have any issues running tracks at all?

I run them on my Talon and have had issues with the I4WD from the day I bought the machine. The tracks have anything to do with it though.

 

[Winterrider]

Can you elaborate on the i4wd issues ?

 

[rickoshea]

the utv 4s1 tracks add 7.25 inches per side to your original track,fronts are 12 inches wide,rears are 14,are about 25 inches tall and will add about 425 lbs.to the weight.your height will increase by 5 inches.the r4s are recommended for larger atv's but not for a utv.especially a 1000cc,the sprocket's too small and it's not as robust as the 4s1.and your speed will decrease by about 1/3 with the 4s1 tracks,more with the r4s,15 teeth to the 18 on the 4s1's.those are 4s1's in my avatar.

 

[Jefferson87]

Can you elaborate on the i4wd issues ?

Not in this thread, I have a thread in the talon general forum.

 

[Rubin]

Love my tracks