P700 6” portals - go big or go home

B

Bigrig

Member
May 15, 2018
9
31
13
Stuart, Florida
Ownership

  1. 700-4
What size tire are you running with the 4 inch portals how much better does it feel with gear reduction? Is it really worth the money on the p700 is what I’m wondering
I don’t have this bike anymore, I actually just switched over to a can am hd10. My tires were the 6” portals and it was on 33”s, It pushed them pretty nicely, but my biggest complaint with the machine is it didn’t have a low gear. I think with the p700, if you are trying to run a larger tire, the portals are a must. The torque increase is very noticeable.
 
Smoking Joe

Smoking Joe

Well-Known Member
Mar 27, 2021
134
418
63
Alaska
Ownership

  1. 700-2
What size tire are you running with the 4 inch portals how much better does it feel with gear reduction? Is it really worth the money on the p700 is what I’m wondering
Ive got the 4inch portals running a 28 inch tire...the performance is amazing but had to beef up my frame and build a new front upper/rear a arm mount as i desyroyed the factory one...the performance is worth it if you can fab new parts as you will most likely break factory stuff
 
Smoking Joe

Smoking Joe

Well-Known Member
Mar 27, 2021
134
418
63
Alaska
Ownership

  1. 700-2
Ive got the 4inch portals running a 28 inch tire...the performance is amazing but had to beef up my frame and build a new front upper/rear a arm mount as i desyroyed the factory one...the performance is worth it if you can fab new parts as you will most likely break factory stuff
I'll send pics of you're interested
 
Smoking Joe

Smoking Joe

Well-Known Member
Mar 27, 2021
134
418
63
Alaska
Ownership

  1. 700-2
I'll send pics of you're inyeres

I'll send pics of you're interested

20230103 152810 20220115 104022 20220115 104014 20220112 143919
 
Smoking Joe

Smoking Joe

Well-Known Member
Mar 27, 2021
134
418
63
Alaska
Ownership

  1. 700-2
Used all thread to get everything straight and tied the new upper mount to the lower frame as the previous mount tried to pull up tearing the frame...beefed the frame with some cut tubing i hit with a radius die in my press brake to form to the round frame...not perfect but its held so far...also used a piece of tubing to tie both upper rear a arm mounts together
 
advertisement

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!