P1000m5 Adam490's Short Bus

[RSX3]

View attachment 263730

View attachment 263731

View attachment 263732

View attachment 263733

View attachment 263734

View attachment 263735

View attachment 263736

View attachment 263737

View attachment 263738

View attachment 263739

View attachment 263740

View attachment 263741

View attachment 263742

View attachment 263743

Maybe I’m not on here enough but I don’t recognize whose red machine is winching yours, like the looks of it and curious if there is a build thread on it or not!?

 

[Admin]

 

[Adam490]

Maybe I’m not on here enough but I don’t recognize whose red machine is winching yours, like the looks of it and curious if there is a build thread on it or not!?

That's @joeymt33 machine, Traveller. He's got a build thread and it's probably one of the best. It'll cost you money 😁

 

[Adam490]

Still waiting on parts to tear down the subtrans. @joeymt33 showed me this swagoffroad.com Portaband table and I had to have one:

Then I couldn't find anything to mount it to...

The old charbroil chargriller gave her life for a better cause

 

[joeymt33]

Still waiting on parts to tear down the subtrans. @joeymt33 showed me this swagoffroad.com Portaband table and I had to have one:

View attachment 264760

Then I couldn't find anything to mount it to...

The old charbroil chargriller gave her life for a better cause

View attachment 264761

View attachment 264762

Love the sticker on the table

 

[Adam490]

Love the sticker on the table

Wait, did you get the CV's out? You either quit or got them out... or jack daniel's won you over

 

[joeymt33]

Wait, did you get the CV's out? You either quit or got them out... or jack daniel's won you over

Jack Daniels is typing this message

 

[Adam490]

Jack Daniels is typing this message

What I figured since I didn't take you for a quitter.... 😁

 

[joeymt33]

What I figured since I didn't take you for a quitter....

Just a break. That’s ok right

 

[Adam490]

Just a break. That’s ok right

Of course, our best work typically happens well after 11-12. Make sure you punch back in or I'm taking your lunch hour.

 

[Adam490]

In case anyone is curious about Joey and I's conversation...

He was trying to do his best Lightning McQueen

 

[Bad_bowtie]

I cant believe I went the whole weekend and didn't take any pictures at Stoney. Usually the wife takes thousands, so I dont have to.

Those Rockzillas just proved to offer more traction than a Pioneer can handle.

 

[Adam490]

I cant believe I went the whole weekend and didn't take any pictures at Stoney. Usually the wife takes thousands, so I dont have to.

Those Rockzillas just proved to offer more traction than a Pioneer can handle.

I was really impressed with mine when I only had high gear and we went up switch back. I did the beginning of Rock Creek too and got up onto the rock to winch in high, wasn't expecting it to pull through there like it did!

 

[red1329]

View attachment 263730

View attachment 263731

View attachment 263732

View attachment 263733

View attachment 263734

View attachment 263735

View attachment 263736

View attachment 263737

View attachment 263738

View attachment 263739

View attachment 263740

View attachment 263741

View attachment 263742

View attachment 263743

you have any more detail on you rock sliders? after this weekend i think im going to do some welding.. had a few boulders hit and dent the outside bar under our door.

 

[Adam490]

you have any more detail on you rock sliders? after this weekend i think im going to do some welding.. had a few boulders hit and dent the outside bar under our door.

It's just angle iron welded onto that outside rail

 

[Adam490]

Parts came in to fix low and swap to the Talon Reverse. Probably get started on it next week. Going to post the parts here just for future reference. Everything came from Partzilla as they were the only ones with everything in stock. Came to $450 for everything. If you just wanted to replace a worn low gear, you'd be looking at about $225:

 

[red1329]

Parts came in to fix low and swap to the Talon Reverse. Probably get started on it next week. Going to post the parts here just for future reference. Everything came from Partzilla as they were the only ones with everything in stock. Came to $450 for everything. If you just wanted to replace a worn low gear, you'd be looking at about $225:

View attachment 265150

View attachment 265153

View attachment 265147
View attachment 265148
View attachment 265149
View attachment 265151
View attachment 265152

I'm assuming the talons revers gear is slower but will give you more power to back out of a hole or pull someone else out?

how many teeth is the pioneers stock revers gear?

 

[Adam490]

I'm assuming the talons revers gear is slower but will give you more power to back out of a hole or pull someone else out?

how many teeth is the pioneers stock revers gear?

Stock Pioneer reverse is 27T with a 16/20T idler.

 

[Adam490]

Finally got around to pulling the sub-trans out.

Had my assistant to help with the Ugga-Duggas

 

[HondaRed16]

Finally got around to pulling the sub-trans out.

View attachment 267100
View attachment 267101
View attachment 267102
View attachment 267103
View attachment 267104

Had my assistant to help with the Ugga-Duggas

View attachment 267105

Best help one could have right there!
😊

 

[Adam490]

It's alive! Just went and romped on it going back and forth between high and low. No issues at all and engagement is rock solid now going to low 👍🏻