clifforeilly
WFOSXS.com
Vendor
Lifetime Member
i may be thinking wrong but if you add shim to one side it gonna give less engagement on the other side
what do you think River ?
i may be thinking wrong but if you add shim to one side it gonna give less engagement on the other side
i dont thinkits gonna work like you hope i personally would put it back stock and make sure the shifter is aligned correctlywhat do you think River ?
i dont thinkits gonna work like you hope i personally would put it back stock and make sure the shifter is aligned correctly
I replaced the reverse low shifter a couple months ago and now it’s doing the same thing again have you had any problems since?just basic hand tools and a manual real simple front diff has to be unbolted to remove front drive shaft and the whole subtrans unbolts like a transfer case and honestly i believe mine was out of adjustment and just didnt know it everything lined up fine but teeth wernt engaged all the way
What parts are need to fix this problem?yes mine did the same think there was a pop and then the edges were rounded off its a cheap fix only takes a few hours
What parts are need to fix this problem?