P1000 Cabin enclosure...

[Tres Ranch]

Winter is getting its act together and after a day of temperatures in the mid teens along with 35-45 mph winds, my neighbors CanAm with enclosed cab really has the advantage over my Honda. I’m underwhelmed by the cost of the hard doors and lesser options... Honda really needs to get their act together and offer cab enclosure options. Just ‘saying

 

[Rayger143]

Honda 1000 5-Seater Enclosure

If out of stock, Please call 330-495-7617 for availability! This enclosure is made for the Honda 1000 5-Seater (to Current.) The enclosure includes all hardware needed for installation and is a full kit with a back window included, and is made with the "finger front" design. The enclosures are...

cecenclosures.com

 

[Buggyman]

Honda prices them like they are GOLD

 

[Remington]

Winter is getting its act together and after a day of temperatures in the mid teens along with 35-45 mph winds, my neighbors CANNED HAM with enclosed cab really has the advantage over my Honda. I’m underwhelmed by the cost of the hard doors and lesser options... Honda really needs to get their act together and offer cab enclosure options. Just ‘saying

View attachment 366572 View attachment 366573

Fixed it for ya!

I have CEC emclosures on both my P1k5 and Talon. There great!

 

[Remington]

Pics….

 

[BWAF]

Honda Gen 2 uppers doors ,soft back .Not perfect but, makes it nicer.

 

[Mark in Northern Iowa]

Or.........go cheap. 👍
.

P1000 - Out of the North Winter wind, or how to be comfortable plowing snow

My cheap cab enclosure. It actually turned out better then I thought it would. ....... and I installed side mirrors, windshield, front bumper lights, and side flashers. My first build try. . First, hats off to these guys for the inspiration. - and - Homemade rear panel and - P1000 - DIY Vinyl...

hondasxs.com

.
Have a good day

 

[Tres Ranch]

Thanks for the Pics... it might be a good way to go for the $$$ - I’m gonna have to do something! It’s single digits again this morning ❄️
View attachment 366598View attachment 366599

 

[Bighat]

Just keeping the wind off of you will do wonders. Mabye throw a big heater in it after you get closed in.

 

[Vikes79]

Sorry to be blunt but I’m not following the logic….nearly 25k ish machine and complaining about the enclosure and its cost

Less than 3 months ago people were complaining about how hot it was inside their enclosures and wanting AC and all this other garbage.

I pulled the trigger on a base P1k5 plus gen1 enclosure in 2018. Take the medicine once and move on. All SXS accessories are expensive regardless of brand.
When your eyeball deep in a 25k toy / machine, what’s another 1k?

 

[Plowboy1466]

I've got the Seizmik upper soft door's. Yes, they help keep the wind off of you, but they aren't perfect. And l agree that any other sxs brand will seal better for the cab. Honda needs to work on that, but l don't want a rubber band under my butt.

 

[Tres Ranch]

Sorry to be blunt but I’m not following the logic….nearly 25k ish machine and complaining about the enclosure and its cost

Less than 3 months ago people were complaining about how hot it was inside their enclosures and wanting AC and all this other garbage.

I pulled the trigger on a base P1k5 plus gen1 enclosure in 2018. Take the medicine once and move on. All SXS accessories are expensive regardless of brand.
When your eyeball deep in a 25k toy / machine, what’s another 1k?

I’m complaining about the cost of hard doors @ $4K for two. Gonna weigh my options... just looking for opinions about what works for folks here

 

[Tres Ranch]

I've got the Seizmik upper soft door's. Yes, they help keep the wind off of you, but they aren't perfect. And l agree that any other sxs brand will seal better for the cab. Honda needs to work on that, but l don't want a rubber band under my butt.

I get that... why I bought the Honda, but I was impressed by a friends Can-Am... in December at 9,000’ elevation

 

[Tres Ranch]

Just keeping the wind off of you will do wonders. Mabye throw a big heater in it after you get closed in.

That would make a huge difference... thanks!

 

[BWAF]

I’m complaining about the cost of hard doors @ $4K for two. Gonna weigh my options... just looking for opinions about what works for folks here

Dam are they that much now 2600 in 17

 

[Tres Ranch]

And to steer things back to my original comments, I suggested that Honda really needed to design better cabin enclosures. Roll down windows, better sealed doors, removable rear panel, etc., and offer said components to those that need them in northern, or my case, high elevation environments. I would happily buy those components from Honda for my cold season, rather than the Ill fitting tentage that most of us have resorted to for want of better options. My neighbors Can-Am pictured below has a real cab with powered windows, heater... sealed doors, roof; refinements that Honda is no stranger to with its auto division that brought us the superior drivetrain on the Pioneer series.

 

[Tres Ranch]

Dam are they that much now 2600 in 17

Unfortunately yes...

 

[Bighat]

If you got a new machine I'd go talk to the salesperson and ask about a discount on some accessories. You should be able to get aleast 10% off if not more. Also, did you check out some of the cheap cab options on the internet. Hard Cabs look nice and way cheaper. Doesn't have the roll down windows, but huge difference in price. Check out these upper doors only. Honda Pioneer 1000 / 1000-5 Aluminum Upper Doors By Offroad Armor – Offroad Armor | Offroad Accessories

 

[Tres Ranch]

If you got a new machine I'd go talk to the salesperson and ask about a discount on some accessories. You should be able to get aleast 10% off if not more. Also, did you check out some of the cheap cab options on the internet. Hard Cabs look nice and way cheaper. Doesn't have the roll down windows, but huge difference in price. Check out these upper doors only. Honda Pioneer 1000 / 1000-5 Aluminum Upper Doors By Offroad Armor – Offroad Armor | Offroad Accessories

Thank you... will definitely take a look. I’ll likely piece some acceptable enclosure together for the winter, and look for a more ideal solution.

I keep reading comments about the upper doors not fitting well, being less than perfect. I’m mostly curious about opening and closing? On my ranch, I’m in and out a lot.

 

[Willeod]

having a full enclosure is nice for multiple reasons. It's really nice after a big snowfall to not have to shovel out the inside of the sxs as well as the outside. I have the Honda OEM canvas enclosures. I like them a lot.