P700 Ground clearance

[bagotaco]

So what's everyones ground clearance at the front after lift and tires. Please state what lift and tire combo. I'm at 12" with rzr shocks up front and 28" Zillas I don't think that's enough

 

[Admin]

 

[bagotaco]

I'm also running 6psi

 

[Tflynn]

Where are you measuring from? Just so we're comparing apples to apples

 

[bagotaco]

Where the front of the A arm bolts to the frame. I'll get a pic tonight

 

[Gator]

11 3/4" in front where the A-arms connect to the frame
13 1/4" right under the hitch receiver

28" Swamp lights and nothing else.

My plans are to install the Can-Am shocks, then do what I must to get minimum 14" clear.

 

[bagotaco]

.

 

[bagotaco]

Fixed it. Now I'm at 14.5" clearance

 

[bagotaco]

So close. 6 psi don't help tho lol

 

[Tflynn]

So close. 6 psi don't help tho lol

View attachment 10884

So what did you do to go up from 12" to 14.5"?

 

[bagotaco]

O

So what did you do to go up from 12" to 14.5"?

I moved the bracket down that I built to mount the rzr shocks

 

[Lynn]

I run 5 lbs in my sadona rip saw's 27" 7/8" shock spacer and high lifter lift kit on lowest setting front and rear. 14" clearance in front 141/2" in rear.

 

[scott]

No lift and 27" tires. Spacer on front shocks. Think it's like 13" front and like 12" rear. But i have a full UHMW skid it makes a HUGE differance. People with more clearance would get hung up and stuck, when i just slide right over it. Rutted out trails that UHMW just slides on them humps. It's nice.

 

[SundayRdr]

2016 p700-4 with CanAm Commander shocks 28.5 (GBC) commander tires and 15 3/4 on front and haven't measured the rear. Was too excited about the front!!!