P1000 Highlifter or strongmade

[aquatic1998]

Yeah same here ! I've never had too good of luck out of bracket lifts on bikes. They tend to overextend when flexing and pop axles.... That's a issue I don't want ! Satv should have the portals out pretty soon for these units and that is gonna be a game changer for sure. If I can survive this dead oilfield around here I will most likely have a set of portals in the future.

Ya I wouldnt mind the portals either if the price isnt to crazy . $3100 is kind of hard to swallow .

 

[Admin]

 

[TOOLOUD]

Agreed ! But it will get back all the power we lost from 30's or even bigger tires plus a GR .... It's a 3,000 decision. Lol

 

[amc019]

I'm ok with being alittle lower. lol Catvos makes pretty good stuff , so I'm glad I went with them. I think we are going to have bigger issues than ground clearance down the rode with the clutch problems I've seen pooping up. Hopefully they come out with something soon for us guys that like to run bigger tires .

I agree, I like that CATVOS may not be a full 3" for the riding I do.

Hoping that as long as we drive these things right, and use manual mode in technical stuff and leave the auto mode for easy driving, we'll be okay.

 

[TOOLOUD]

We all have TOO MUCH money in our rigs to go out and destroy them. I will sit back and watch someone else tear their stuff up - lucky for me I don't drink so I won't get wasted and tear mine up. It will get used but not abused !

 

[Fullthrottle]

Anybody have the hilifter kit installed yet?

 

[TOOLOUD]

Don't think it's been released yet.

 

[chadbo]

Don't think it's been released yet.

Just the bracket lift is @ 189 I think

 

[Sergeant206]

Just the bracket lift is @ 189 I think

I bought the HL one and it came in but no install time yet. I would love to see one mounted too. I guess I need to make the time!

 

[BigRiver]

Spoke to HighLifter this afternoon, checking on the availability of the arched a arms. Was told maybe another 4 weeks. I was able to get on the so called list, will be notified when they're available.
I have to say that I was disappointed in the quality control of that other company's arched a arms. The install that another member had here was not impressive. Some of the brackets were just plain out of alignment.
I've always heard good about HL, think I'll wait for their equipment.

 

[Fullthrottle]

I bought the HL one and it came in but no install time yet. I would love to see one mounted too. I guess I need to make the time!

Yes you do lol.

 

[PioneerPete]

I bought the HL one and it came in but no install time yet. I would love to see one mounted too. I guess I need to make the time!

yes! take one for the team! we wants to see it!

 

[chadbo]

I bought the HL one and it came in but no install time yet. I would love to see one mounted too. I guess I need to make the time!

Yes please hurry and let us know

 

[Tot]

I'm thinking of ordering the highlifter 2.5" bracket lift. My rig will be here on the 1st. If you get a chance to get it on and pictures taken it would be much appreciated!

I bought the HL one and it came in but no install time yet. I would love to see one mounted too. I guess I need to make the time!

 

[chadbo]

I bought the HL one and it came in but no install time yet. I would love to see one mounted too. I guess I need to make the time!

Tic toc

 

[Scooterchris]

Here I'm gonna bring up a kinda old post.

What is the pro's and con's of the high lifter 2.5 inch lift vs. The strong made 2 inch lift.

I just want to keep my 28 tires on there. Don't want to go any bigger but want a little more ground clearance.

 

[Tot]

Here I'm gonna bring up a kinda old post.

What is the pro's and con's of the high lifter 2.5 inch lift vs. The strong made 2 inch lift.

I just want to keep my 28 tires on there. Don't want to go any bigger but want a little more ground clearance.

I have nothing bad to say about the Highlifter. The brackets are thick and well built. Super easy install. Improved the ride quality to me even on the stock wheels. I was able to clear a 5 gallon bucket with just the lift on stock tires.

These tires measure 28" tall.

 

[Scooterchris]

I have nothing bad to say about the Highlifter. The brackets are thick and well built. Super easy install. Improved the ride quality to me even on the stock wheels. I was able to clear a 5 gallon bucket with just the lift on stock tires.

These tires measure 28" tall.

View attachment 12197

View attachment 12198

I know. I like the way yours looks tot. Just worried about the shocks being straight up and down. The p700 were like that and was bad news with the highlifter mount.

Guess what I'm asking is more "How is the strong made lift"

 

[Tot]

If I remember correctly Jackal has the strongmade lift hopefully he will chime in

 

[Scooterchris]

Anything sir @JACKAL

 

[Delton]

We went over some big rocks last week and didn't notice any flexing or bending with the HL kit. So far so good