Honda Talon Roll Cage

[Brink]

Looking for someone that wants to sell there stock Honda talon roll cage that is not wrecked and in decent condition in Ohio. It can be any color with or without roof. Let me know what you want for it and where you are located near so I know how far I will be driving.

 

[Admin]

 

[NTCPrezJB]

Looking for someone that wants to sell there stock Honda talon roll cage that is not wrecked and in decent condition in Ohio. It can be any color with or without roof. Let me know what you want for it and where you are located near so I know how far I will be driving.

Sounds like someone had a rollover. Post up some pics.
Welcome to the club.
Rule #1..pics or it didn't happen

#NTC

 

[Brink]

Sounds like someone had a rollover. Post up some pics.
Welcome to the club.
Rule #1..pics or it didn't happen

#NTC

I got super lucky actually, jumped it at silver lake sand dunes and it bucked all the way over. I only bent the cross member above my head and the roof tabs. The wind sheilds were fine and the light bar just folded down, no plastic breaks. If I posted a picture you would never notice until you get up close.

 

[WilliamRamey]

Will have a stock cage and roof from a 2021 1000XLV available very soon. My Talon is at the fabricators getting a custom cage. Located in Pike Co in eastern KY. 0 miles on the Talon, color is blue

 

[Brink]

10 hour round trip for me, how much you want for it?

 

[Farmer]

Maybe a dumb question.........can't you repair it if it's just one bar and the tabs? Weld shop?

 

[Brink]

Maybe a dumb question.........can't you repair it if it's just one bar and the tabs? Weld shop?

Yes I could and I am going to fix and reinforce the wrecked roll cage but if I ever sell it I would like to make sure it has a good and proper cage on it so someone doesn't get hurt.

 

[WilliamRamey]

$500 for the cage

 

[Brink]

$500 for the cage

Shoot me a message when you have a moment 3308319766

 

[HondaTech]

I'll ask my GM and coworker with cages if they might want to sell theres. We may have a front half upstairs from the weld "recall".

I won't know until tomorrow.

Would be in Fairfield, OH

 

[SLOWPOKE693]

At the very least why not go with a DIY cage kit? For just about double the cost of a used stock cage and a few hours of welding you will end up with something far superior. The stock "cage" is nothing more than a roof holder, trusting your life with it in a machine capable of 80mph is foolish. You got lucky once, why chance it a second time?

My .02 cents

 

[WilliamRamey]

Cage still available, plastic roof goes with it free. It's in the way

 

[Sheetmetalfab]

At the very least why not go with a DIY cage kit? For just about double the cost of a used stock cage and a few hours of welding you will end up with something far superior. The stock "cage" is nothing more than a roof holder, trusting your life with it in a machine capable of 80mph is foolish. You got lucky once, why chance it a second time?

My .02 cents

Have you seen an x4 cage kit?

 

[SLOWPOKE693]

Have you seen an x4 cage kit?

UTV Source | Your One Stop Shop For UTV Accessories and Parts

At UTV Source, we carry the best parts and accessories for Polaris RZR, Can-Am Maverick X3, Yamaha YXZ, and more. We have everything you need to get the most out of your UTV.

www.utvsource.com

 

[Brazula4life]

Anyone running an intrusion bar on stock cage?

 

[kwd]

Looking for someone that wants to sell there stock Honda talon roll cage that is not wrecked and in decent condition in Ohio. It can be any color with or without roof. Let me know what you want for it and where you are located near so I know how far I will be driving.

I have a stock roll cage, roof, front bumper, intrusion bar, seat belts, and wheels/tires all for sale in NC. call/text Ken 336-924-2294