KFI winch wiring? Help

[duwops]

Ok wiring done except red wire to ignition switch. Looking at pioneer ign switch there are two reds a red and red and black wire. Which one do I connect the red KFI rocker switch wire to?

 

[Admin]

 

[Hondasxs]

pioneer-accessories-and-modifications-f48/need-help-t678.html#p3753
Look at post #3.
Most people wire it to this wire. however some have chosen to tap the aux 12v accessory wires.\\
This question comes up all the time. I may make a section for how-to's sometime.

 

[duwops]

Thanks so very much! The only dumb ? Is the one you don't ask.

 

[Hondasxs]

Thanks so very much! The only dumb ? Is the one you don't ask.

Yep,
Thats why we started this community. So we could get quick answers to our questions.
Thank you for being a part of it.

 

[duwops]

Next ? KFI rocker out/in is reversed. I did have to reverse color wires as to mount contractor under hood but after double checking. Pos to pos and neg to neg. bat to contactor and motor to contactor. Reversed in switch ?

 

[farmer700]

Next ? KFI rocker out/in is reversed. I did have to reverse color wires as to mount contractor under hood but after double checking. Pos to pos and neg to neg. bat to contactor and motor to contactor. Reversed in switch ?

I know this one as I have been here on my pos-laris.
Just reverse the rocker switch wires. Leave the HOT wire along flip the other 2.

 

[farmer700]

Oh. looking at there site, you cant without cutting the wire.
You can reverse the wires from contractor to winch to get same effect.

All the contractor does is flip (+) and (-) depending on which way the rocker is pushed.

 

[duwops]

Thanks Farmer700 that did the trick. All that's left is to secure all wiring, install hood and sling some mud.

 

[Hondasxs]

Thanks Farmer. Seems you beat me to it.

 

[farmer700]

Thanks Farmer. Seems you beat me to it.

No prob. figured I help where i can.