P1000 Line lock parking brake

[JTW]

Ok.. so I got my line lock parking brake installed last night. Just need someone to give me a hand pumping the peddle and I'll be finished.. However, I have one question.

Do I need to bleed all 4 or will just the fronts be fine?

@CumminsPusher @Windrock1000 @joeymt33 @PioneerPete

 

[Admin]

 

[CumminsPusher]

Ok.. so I got my line lock parking brake installed last night. Just need someone to give me a hand pumping the peddle and I'll be finished.. However, I have one question.

Do I need to bleed all 4 or will just the fronts be fine?

@CumminsPusher @Windrock1000 @joeymt33 @PioneerPete

You can get by with front only usually but do all 4. There have been several people saying they stopped much better after bleeding. I don't think some have all the air out from factory

 

[JTW]

You can get by with front only usually but do all 4. There have been several people saying they stopped much better after bleeding. I don't think some have all the air out from factory

10-4

 

[Eltobgi]

@JTW let's see the pics!

 

[JTW]

Here ya go.. I had to run mine a little different as I have the under dash shelf.. it was a b****! I had to use copper nickel lines as the steel wouldn't bend the way I needed because I had to connect them to the line lock and feed them and the line lock thru the dash hole in order to get it all in. Now I just hope it all works! Lol

 

[Eltobgi]

Looks great! Love that you copied my install jk lol. Makes it look so much cleaner with a flush mount! I was thinking it would be cool on mine to replace the rubber plunger with something a little more beastly...maybe a punisher skull. Lol.

 

[JTW]

Looks great! Love that you copied my install jk lol. Makes it look so much cleaner with a flush mount! I was thinking it would be cool on mine to replace the rubber plunger with something a little more beastly...maybe a punisher skull. Lol.

I didn't know you went with the flush mount.. did you have as much trouble as I did?

 

[GlockMeister]

Here ya go.. I had to run mine a little different as I have the under dash shelf.. it was a b****! I had to use copper nickel lines as the steel wouldn't bend the way I needed because I had to connect them to the line lock and feed them and the line lock thru the dash hole in order to get it all in. Now I just hope it all works! Lol

View attachment 39132 View attachment 39133 View attachment 39134 View attachment 39135

Looks good. It would be cool if you could rig a light to come on when it was engaged.

 

[Eltobgi]

Yes I did! Lol. If I had to do it again I could easily improve my install time! I came in from wheel well as well as switch plate opening! Bolting it in place was a b****!

 

[JTW]

Looks good. It would be cool if you could rig a light to come on when it was engaged.

I actually have an alarm rigged to it when engaged.. it squalls and stalls the machine if you try to run with it engaged.

 

[Eltobgi]

Here's mine...

 

[JTW]

Yes I did! Lol. If I had to do it again I could easily improve my install time! I came in from wheel well as well as switch plate opening! Bolting it in place was a b****!

Yes.. I also didn't cut the end of my lines for the metric ends until I already had the lock installed. I was afraid they'd be too long and have too much extra. Turns out my lines were the perfect length so I could have saved a lot of trouble by just doing that step on the bench.

 

[JTW]

Here's mine...
View attachment 39152 View attachment 39153 View attachment 39154

Hummmm.. appears I may have went a little overboard with my washers! Lol

 

[Eltobgi]

No...I should have added some for additional strength! But I was working out of my spare parts box! Overall I'm happy with mine!

 

[JTW]

No...I should have added some for additional strength! But I was working out of my spare parts box! Overall I'm happy with mine!

As long as mine doesn't leak.. I will be!

 

[Eltobgi]

As long as mine doesn't leak.. I will be!

Oh ya mine leaked had to make adjustments wasted another 30 min with that. Good luck. lol

 

[JTW]

Oh ya mine leaked had to make adjustments wasted another 30 min with that. Good luck. lol

I tightened the dog s*** out of mine.. I really don't know what else I could do. Fingers crossed!