P1000 Project: Ramen Noodles

[Bastardchild]

A few pics of where Im at with it tonight. Got the holes drilled for the eyelets and then I sanded it down and sprayed a few coats of gloss black on it from a rattle can. Im cleaning up and going out for dinner. Yall be good!

 

[Smitty335]

Ok folks, I got a little more done on the bed organizer. Placed everything just right and traced around everything, jigsawed the holes out and gave it a little light frame work underneath. Everything sinks down in like 3.5" deep. I just have to paint it and install the little eyelets to the sides of the boxes and stuff to strap, bungee, or use turnbuckles to keep everything in. Heres some pics. Mr. Wiggy the Wonder Piggy was no help at all. I'll update again later.

View attachment 125288 View attachment 125289 View attachment 125291 View attachment 125292 View attachment 125293 View attachment 125294 View attachment 125295 View attachment 125296 View attachment 125298 View attachment 125299 View attachment 125300 View attachment 125301

That's way to organized for me! HA!

 

[Bastardchild]

Ok latest update on Project: Ramen Noodles. I got the bed organizer done. All of my tools and stuff is packed for the trail. Got a 6 gallon can for water, and a 6 gallon can for gas. Im gonna fill each one about half way to save on weight. I think Im also gonna run a vent line out of the little breather hole on the gas can and run the vent line down the roll cage tubing to underneath the sxs where it can breath a little air to keep the can from swelling from gas fumes. Or maybe run it up high, who knows. You can see how I got some el'cheapo ratchet straps to hold the organizer down inside the bed, and also holding the cans down. I have another el'cheapo strap to run across the top of the Milwaukee pack out box from left to right and it will hook to eyelets on either side of the box. The cooler is held in by little baby turnbuckles. Ok, her sxs is done and ready for Takeover. I look forward to having a few frosty adult beverages with yall!

 

[Bastardchild]

Decided to run it up high, but ran out of zipties. Will get more ties tomorrow and then it will be done I guess.

 

[russknight]

Well I’m not Garrett lol. I’m josh but it’s good to know us cracker are around lol.

Y'all ever ride in the Osceola Forest?

 

[Bastardchild]

Y'all ever ride in the Osceola Forest?

Just rode there a few weekends ago at the west tower. We had a blast. Ive got a few silly youtube vids of it if you wanted to look it up. Also, if you do the facebook thing, my wife runs the PhukDup ATV page over there. You can join the page and get in on rides, or post rides of your own.

 

[DanDan]

Speaking of cupholders, here are the ones I put in my P5 and my 1000. I look forward to seeing this build. Lot of pics please!

https://www.amazon.com/gp/product/B009DCGT74/?tag=sxsweb24-20

View attachment 98819

Did you have to trim the plastic before the SS cup holder would fit?

 

[JTW]

Did you have to trim the plastic before the SS cup holder would fit?

Yes

 

[DanDan]

Yes

Dremel?

 

[JTW]

Dremel?

That’s the easiest..

 

[DanDan]

That’s the easiest..

Good copy. I think the cup holders will be a Christmas present to my wife.

 

[DanDan]

That’s the easiest..

Also, congrats on the birth of your new son.

 

[gmacaluso]

Yes

Yes, used a dremmel tool to cut slowly until the replacement fit snugly.